Paris Outdoor 1 Light Wall Lantern E27 - Galvanised Silver IP43

The Norlys Paris is an outdoor wall lantern built around a half-dome galvanised steel shell that directs light downward through a translucent diffuser. The fitting accepts a single E27 bulb up to 60W (sold separately) and carries an IP43 rating, meaning it handles dust ingress and light rain spray but requires shelter from sustained direct rainfall.

Designed for covered porches, sheltered doorways and recessed entrance areas, the Paris mounts flush to the wall with a 140mm projection from the mounting surface. The half-dome shell casts light downward in a contained pool, useful for illuminating thresholds, house numbers or the immediate step outside a door without spilling light widely across a facade. The 230mm diameter and 115mm height sit proportionally on most residential brick or render walls without overwhelming the mounting surface.

The galvanised steel construction provides corrosion resistance in sheltered outdoor environments. The silver-grey finish on the shell pairs with modern render, weathered timber cladding and natural stone without clashing with warmer or cooler exterior colour palettes. The IP43 rating means the fitting handles UK coastal and urban conditions where the mounting location provides overhead shelter from direct rain, but it is not suitable for fully exposed positions subject to driving rain or water pooling.

Norlys backs the Paris with an 8-year manufacturer guarantee, reflecting confidence in the galvanised construction and sealed lamp compartment. The E27 socket gives flexibility to choose LED, halogen or filament bulbs depending on colour temperature preference, with most installations pairing this fitting with a warm-white 6-10W LED bulb at 2700K-3000K for a welcoming entrance light.

Can this be used in fully exposed outdoor positions?

No. The IP43 rating handles dust and light rain spray but requires overhead shelter from sustained direct rainfall. Suitable locations include covered porches, recessed doorways and areas under eaves. For fully exposed walls, choose a fitting rated IP54 or higher.

What bulb is recommended?

The E27 socket accepts any standard Edison screw bulb up to 60W. Most installations use a warm-white LED between 6-10W and 2700K-3000K for a welcoming entrance light. Bulbs are sold separately.

How is the fitting mounted?

The Paris mounts directly to an external wall with the back plate fixed using screws into plugs or masonry anchors. The 140mm projection from the wall gives clearance for the half-dome shell. A qualified electrician should handle the installation and ensure the cable entry point is sealed against moisture ingress.

Does the galvanised finish require maintenance?

Galvanised steel is naturally corrosion-resistant and requires no special maintenance beyond occasional cleaning with a damp cloth to remove dust and airborne deposits. Avoid abrasive cleaners that could scratch the finish.