Description
A slim horizontal bar finished in sand black, this picture light runs 60cm across and sits close to the wall, with a shallow projection that keeps it out of the way of a frame. The light source is a built-in LED array rated at 12W, giving a warm white output at 3000K that flatters oils, prints and photographs alike. It is not dimmable and has no switch on the body, so it takes its cue from the wall switch or circuit it runs on. A driver is supplied as part of the fitting.
We reach for a light this length above wide canvases, panelled overmantels and long stretches of shelving, where a single downward wash reads more calmly than a pair of shorter lamps. It works in a hallway hung with family pictures, in a study above a map or drawing, and in a dining room where you want the art lit rather than the table. The warm tone suits older interiors and dark paint especially well. We stock the shorter and longer sizes too, so a set of pictures can be lit to matching effect at different widths.
The body keeps to a plain, unfussy outline, finished in a matt sand black that soaks up glare rather than bouncing it back at the viewer. Keep it looking right by wiping the top face now and then with a dry duster, since a horizontal ledge at that height gathers dust before anything else does. It carries a three year warranty. The LED is part of the fitting, so there is nothing to replace as you go. In this width we also offer antique brass and polished chrome if black is too stark against a pale wall.
Specification
| Colour |
Sand Black |
| Wall Mountable |
Yes |
| Weight |
0.70KG |
| Width |
600mm |
| Height |
145mm |
| Projection |
195mm |
| Materials Used |
Stainless Steel, Iron, Acrylic |
| Adjustable Height |
No |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 12W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| No. of Switching Cycles |
30000 |
| Average Life of LED (hrs) |
25000hrs |
| LED Brand |
Epistar |
| Qty of SMD |
60 |
| SMD Chipset |
2835/0.2W |
| LED Power (W) |
12W (±5%) |
| Type of LED |
EPISTAR 2835 |
| Lumens Per Watt (lm/W) |
76lm/W (±5%) |
| Beam Angle (°) |
120° |
| System Flux (lm) |
908lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
12W (±5%) |
| Input Voltage (V) |
175-265V~ 50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life (hrs) |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What are the dimensions?
It measures 600mm wide and 145mm high, and stands 195mm out from the wall, so it clears the top edge of most framed work.
Does it take a bulb?
No. The LED is integrated, drawing 12W for 908 lumens at 3000K warm white, with a rated life of 25,000 hours.
Can I dim it?
No, this version is non-dimmable, and it has no switch of its own on the body.
Is it suitable for a bathroom?
It is rated IP20, so keep it to dry rooms such as hallways, sitting rooms, studies and bedrooms.
What other sizes and finishes are there?
Sand black also comes in 45cm and 90cm, and this 60cm width is offered in antique brass and polished chrome as well.
How should I clean it?
A dry cloth or soft duster over the top face and front is all it asks for. Avoid solvents and abrasive creams on the matt finish.