Description
Our Overlapping Squares 3D wall panel is a white 50 x 50cm square covered in flat-topped squares and rectangles, each with softly rounded edges and all set square to the panel's sides. They overlap one another at different heights in an irregular, asymmetric layout, ranging from narrow strips to broad blocks, so the surface steps up in layers. The relief is 21mm deep, enough for each block to throw a narrow shadow along its edges, which gives this geometric pattern its sense of depth. The layout repeats from panel to panel rather than within each one, so a finished wall shows the same arrangement again and again.
These 3D wall panels are made for interior walls in homes, offices, hotels and shops. Fitted across a feature wall behind a bed, a sofa or a reception desk, they bring depth to a plain surface without adding colour, so they sit happily with almost any scheme. The pattern changes with the light: when it falls from one side, the stepped blocks cast crisp shadows and the layers stand out, while even light lets the white settle into a quieter texture. The straight lines and rounded corners suit a modern or minimal room, from a hallway or living room to a meeting room.
Each panel is made from a 0.8mm PVC sheet. To fit one, spread adhesive on its back and press it onto the wall. The panels cut to fit, and the joins are filled with filler and wiped clean, with no special equipment needed. Adhesive and filler are sold separately. Four panels cover one square metre, a handy figure when working out how many your wall needs. PVC is waterproof and low maintenance, so a wipe with a damp cloth keeps the surface clean. To finish, take the panels right up to the ceiling for a tidy, full-height look.
Specification
| Pattern |
Overlapping Squares |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
21mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Overlapping Squares pattern look like?
Flat-topped squares and rectangles with softly rounded edges overlap at different heights in an irregular layout, all set square to the panel's edges, and the layout repeats from one panel to the next.
How big is each panel and how many will I need?
Each panel is a 50cm square, so four of them cover one square metre of wall, which makes it straightforward to work out the total for your space.
How are the panels fixed to the wall?
You spread adhesive across the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean.
Do I need anything else to fit the panels?
Yes. The adhesive for fixing and the filler for the joins are both bought separately, so have them ready before you start fitting.
Can I cut the panels to fit my wall?
Yes, they cut to fit around the edges of a wall, and no special equipment is needed to put them up.
How do I clean the panels?
A wipe with a damp cloth is all they need, as the PVC is waterproof and low maintenance.