Ordo LED Pendant Light - Black with Cognac Ribbed Glass

The Ordo is an 8cm diameter pendant light built around a vertically ribbed cognac glass cylinder, suspended from a black metal canopy on a braided cable. An integrated 8W LED at 3000K sits inside the glass, casting warm light through the amber-tinted ribs. The vertical embossing on the glass creates a column-like texture that refracts light into vertical bars on surrounding surfaces.

Designed for installation above kitchen islands, dining tables and in entrance halls, the Ordo works individually as a focused accent or in rows of two or three for zoned task lighting. The adjustable suspension extends from 733mm to 3650mm, allowing the pendant to be set 700-800mm above a dining surface or 600mm above a kitchen worktop depending on ceiling height. The 8cm slender profile keeps the fitting unobtrusive in narrower spaces where a wider pendant would dominate sightlines.

The cognac glass is a warm amber tone rather than clear or frosted, which softens the LED output and gives the pendant a decorative presence even when switched off. The black metal canopy and cable provide contrast against the amber glass and pair cleanly with matt black tapware, cabinetry hardware and door furniture. The ribbed texture on the glass references mid-century Scandinavian and Art Deco glasswork without replicating a specific historical style.

Product Manual

Is the Ordo dimmable?

The integrated 8W LED operates on 220-240V AC. Dimmer compatibility depends on the specific dimmer model. Maytoni does not specify dimmer compatibility for this fitting, so please contact us before pairing with a dimmer to confirm.

What ceiling height is required?

The suspension adjusts from 733mm to 3650mm. For a dining table or kitchen island the pendant typically sits 700-800mm above the surface, which works in rooms with ceiling heights of 2.4m or above. The maximum drop suits double-height entrance halls and stairwells.

Can it be installed in a bathroom?

No. The IP20 rating means the fitting is not protected against moisture ingress and must only be installed in dry indoor locations away from direct water contact.

How is the glass cleaned?

Wipe the cognac glass with a dry microfibre cloth. For fingerprints or marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the glass or using household sprays that may leave residue in the vertical grooves.