Description
Our Offset Pyramid Squares 3D wall panels bring a bold geometric relief to a plain wall. Each white PVC panel is a 50cm square holding four smaller squares, set two by two with narrow grooves between them. Every square carries a lopsided faceted pyramid: a long, gentle slope climbs from the panel's outer edge to a short ridge near the centre, with three steeper facets falling away on the other sides. Each square is turned a quarter turn from its neighbour, so the four ridges circle the centre of the panel in a pinwheel. The relief is 45mm deep, so the steep lower sides fall into strong shade in side light.
We think these panels suit interior walls in homes, offices, hotels and shops, wherever a flat surface would benefit from depth and pattern. Run them across a feature wall behind a bed or sofa, along a hallway or behind a shop counter. Because each square leans a different way, the pattern changes as light moves across the room: in the morning one set of facets catches the brightness while another falls into shadow, and by evening, under lamps, the pinwheel reads differently again. When working out how many you need, four panels cover one square metre.
Each panel is made from a 0.8mm PVC sheet, and fitting needs no special equipment. Spread adhesive over the back of the panel, press it onto the wall, and cut panels to fit at the edges. Fill the joins with filler and wipe them clean so the pattern runs on from one panel to the next. Adhesive and filler are sold separately. Once up, the panels are waterproof and low maintenance: a wipe with a damp cloth is all they need. For a tidy finish, start from the centre of the wall and work outwards so the cut panels sit evenly at both ends.
Specification
| Pattern |
Offset Pyramid Squares |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
45mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Offset Pyramid Squares pattern look like?
Each panel has four squares set two by two, each with a lopsided faceted pyramid, turned a quarter turn apart so the ridges form a pinwheel around the centre.
How big is each panel and how much wall does it cover?
Each panel is a 50 x 50cm square, and four panels cover one square metre of wall, which makes it straightforward to plan how many to order.
How are the panels fixed to the wall?
Spread adhesive on the back of each panel, press it onto the wall and cut panels to fit at the edges. No special equipment is needed for the job.
What else do I need to fit them?
You will need adhesive to fix the panels and filler for the joins. Neither comes with the panels, so add both to your order.
Where can I use these 3D wall panels?
They suit interior walls in homes, offices, hotels and shops. They work especially well across a feature wall where side light picks out the deep relief.
How do I clean the panels?
The PVC is waterproof and low maintenance, so a wipe with a damp cloth keeps the white surface looking fresh.