Description
Our Offset Concentric Capsules 3D wall panels bring a calm geometric rhythm to a plain wall. Each white PVC panel is a 50 x 50cm square set with three evenly spaced columns of tall vertical capsules, every one drawn in four nested outlines inside a bevelled outer edge. The centre column holds one whole capsule, while the outer columns hold half capsules, U-shaped at the top edge and arched at the bottom edge, so they sit offset from the centre by half the panel's height. The relief is 15mm deep, enough for the bevels and the fine inner rings to catch soft, clearly defined shadows without the wall feeling busy.
These 3D wall panels suit interior walls in homes, offices, hotels and shops. Run them across a feature wall behind a sofa or a bed, behind a reception desk, or as a backdrop to a shop display, where the repeating capsules give a quiet sense of movement without crowding the room. The pattern comes alive with the light: a lamp or window to one side draws the shadows out along each bevel and ring, while flat, even light softens it to a gentle texture. Four panels cover one square metre, which makes it easy to work out how many your wall needs before you order.
Each panel is made from a 0.8mm PVC sheet, and fitting needs no special equipment. Spread adhesive on the back of the panel and press it onto the wall, cut panels to fit at the edges, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. PVC is waterproof, so a damp cloth is all it takes to keep them clean, with very little maintenance. For a considered look, pair them with plain furniture and a single wall light set to one side, and let the capsules do the talking.
Specification
| Pattern |
Offset Concentric Capsules |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Offset Concentric Capsules pattern look like?
It has three evenly spaced columns of tall vertical capsules, each drawn in four nested outlines with a bevelled outer edge. The centre column holds a whole capsule, and the outer columns hold half capsules offset by half the panel's height.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, which is the simplest way to work out how many your wall needs.
How are these 3D wall panels fixed to the wall?
Spread adhesive on the back of each panel and press it firmly onto the wall. No special equipment is needed, and you can cut panels to fit at the edges of the wall.
What else do I need to fit them?
You will need adhesive to hold the panels and filler for the joins, as neither comes with the panels. Once the joins are filled, wipe them clean for a neat finish.
Where can I use these panels?
They are made for interior walls in homes, offices, hotels and shops, and they work especially well across a feature wall where light falls from one side.
How do I clean the panels?
Wipe them over with a damp cloth. PVC is waterproof, so the panels need very little maintenance to keep looking fresh.