Description
This is the linear connector for our Office range of wide linear pendants: a white joining kit that lets two of those pendants run end to end as one continuous line of light. It comes as a pair of flat rectangular plates, each drilled with a pattern of holes, together with a set of small grub screws. Each plate is 12cm long, 32.6mm wide and 2mm thick, and the kit weighs 0.12KG. The pendants are not included. This is an optional accessory, and you need one kit for each join between two pendants.
It is the part to add when one pendant on its own would stop short of the space you want to light: a long desk, a meeting table or a row of workstations in an open-plan office. Joining the pendants end to end gives an unbroken run rather than separate fittings with gaps, so a long line of light reads as a single, considered piece. Because the kit is optional, you buy only as many as your layout needs, and a single pendant can always stay on its own.
The plates are flat and just 2mm thick, so they add very little bulk where two pendants meet, and their white finish keeps them discreet. When you plan a run, count the joins rather than the pendants, because every join takes its own kit. As with any mains lighting, the pendants are installed by a qualified electrician.
Specification
| Length |
120mm |
| Width |
32.6mm |
| Thickness |
2mm |
| Fits |
Two of the range's wide linear pendants, end to end |
| Finish |
White |
| Certification |
CE |
| Weight |
0.12KG |
| Warranty |
5 Years |
Frequently Asked
Which pendants does this connector fit?
It fits our Office range wide linear pendants, joining two of them end to end so they run as one continuous line.
Are the pendants included with the connector?
No, the pendants are not included. This listing is for the joining kit alone, an optional accessory for the Office range wide linear pendants.
How many connector kits do I need?
You need one kit for each join, so count the places where two pendants meet end to end rather than the pendants themselves.
What comes in the connector kit?
The kit comes as a pair of flat white rectangular plates, each drilled with holes, together with a set of small grub screws.
How big are the connector plates?
Each plate is 12cm long, 32.6mm wide and 2mm thick, and the kit weighs 0.12KG, so it adds very little bulk at the join.
What finish does the connector have?
The connector is finished in white, a plain and discreet colour that keeps the join between two pendants low-key.