Niseko 90cm LED Pendant Light with Remote Control - White

The Niseko is a 90cm circular LED pendant light with an integrated 66W LED band housed within a matt white ring, emitting 5440 lumens downward through an opal diffuser. The remote control adjusts both brightness and colour temperature across the full tuneable white range from 2700K warm white to 5000K daylight, allowing the same fitting to provide warm ambient light in the evening and brighter task light during the day.

Designed for dining tables, kitchen islands and open-plan living spaces, the 90cm diameter suits tables seating 6-8 people or islands spanning 2.4-3m in length. The adjustable drop ranges from 250mm minimum to 2000mm maximum on installation, with fine-gauge steel suspension cables that hold the ring level while remaining visually minimal. The 145° beam angle distributes light widely across the surface below without creating hard shadows or bright spots.

The matt white finish on the metal ring gives a clean, neutral presence that recedes into white or light-coloured ceilings while the opal diffuser softens the LED output to avoid glare when viewed from the side. At 6.2kg the fitting requires secure ceiling fixings capable of supporting the weight plus a small safety margin, but the distributed mass across the 90cm diameter keeps the ring stable under air movement. The remote operates dimming and colour temperature independently, stored in memory when the fitting is powered off.

How is the colour temperature controlled?

The included remote control adjusts colour temperature across the full 2700K to 5000K range and stores the last setting in memory. Dimming and colour temperature are controlled independently, allowing warm dimmed light or bright daylight tones depending on time of day and task.

What table or island size does the 90cm diameter suit?

The 90cm diameter works above dining tables seating 6-8 people or kitchen islands spanning 2.4-3m in length. For smaller tables under 1.6m or islands under 2m, the smaller 60cm Niseko variant provides better proportions.

Can the drop height be adjusted after installation?

The suspension cables allow adjustment between 250mm and 2000mm during initial installation. Once the cables are cut and fixed at ceiling level, adjusting the drop requires re-accessing the ceiling rose and shortening or extending the cable run.

Does the remote require line-of-sight to the fitting?

Most LED remote controls operate via infrared and require approximate line-of-sight to the fitting's receiver. The signal typically reflects off walls and ceilings, so exact aim is not critical, but operation from another room or behind solid barriers may be unreliable.