Description
Our Nested Oval Rings 3D wall panels set a loose scatter of raised oval rings across a flat ground. Every oval tilts the same way, leaning from lower left to upper right, so the whole design carries a gentle diagonal movement. Two large ovals fill opposite quarters of the panel, each with a smaller ring nested slightly off centre inside it, while two smaller single ovals sit in the remaining corners. The rings are thick and rounded, standing clear of the ground in a relief 13mm deep, and each white PVC panel is a 50cm square.
These panels are made for interior walls in homes, offices, hotels and shops, and they work best as a feature wall: behind a bed or sofa, along a reception desk, or framing a display. Because the rings scatter on a diagonal rather than sitting in rows, a wall of them has an easy, drifting rhythm. The relief gives soft shadows in even light and firmer outlines when light rakes across from a window or lamp, so placing a wall light to one side brings the rounded rims forward. Four panels cover one square metre, which makes working out how many a wall needs simple.
Each panel is formed from a 0.8mm sheet. To fit one, spread adhesive on its back and press it onto the wall; no special equipment is needed. The panels cut to fit at the edges of a wall, and the joins are filled with filler and wiped clean. Adhesive and filler are sold separately. PVC is waterproof and low maintenance, so a wipe with a damp cloth keeps the rings clean. For a calm room, keep the walls around the feature plain and let the ovals do the work.
Specification
| Pattern |
Nested Oval Rings |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
13mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Nested Oval Rings pattern look like?
Raised oval rings tilt the same way across a flat ground. Two large ovals hold smaller nested rings, and two small single ovals sit in the opposite corners.
How big is each panel and how many will I need?
Each panel is 50 x 50cm, and four of them cover one square metre. Measure the area of your wall to work out the number you need.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel and press it firmly onto the wall. Cut panels to fit at the edges, then fill the joins and wipe them clean.
What else do I need to fit the panels?
You will need adhesive for the backs and filler for the joins, and both are bought separately. No special equipment is needed for the job.
Where can I use these panels?
They are made for interior walls in homes, offices, hotels and shops, and they make a good feature wall behind a bed, a sofa or a desk.
How do I clean them?
Wipe the panels with a damp cloth whenever they need it. The PVC is waterproof and needs very little maintenance.