Nemo M CCT Dimmable LED Ceiling Fan Light With Remote Control - White & Wood

The Nemo M is a 122cm ceiling fan light with three wood-finish blades radiating from a white cylindrical motor housing, fitted with an integrated 56W CCT LED array delivering 3200 lumens. The LED colour temperature adjusts from warm white (2700K) to daylight (5000K) via the included remote control, which also handles dimming and fan speed selection across six settings.

Designed for rooms with ceiling heights of 2.4m or above, the Nemo M suits living rooms, bedrooms and open-plan spaces where year-round air circulation and overhead lighting share the same ceiling position. The 250mm drop from ceiling to lower edge of the motor housing allows installation on standard ceilings without requiring hugger-mount adaptations. The remote control eliminates the need for wall-mounted dimmers or pull-chain controls, and can operate multiple fans in the same room by pairing to individual units.

Each blade spans approximately 610mm from hub to tip and curves slightly along its length to increase airflow efficiency while reducing operational noise. The aerodynamic profile keeps the fan quieter than flat-blade designs at higher speeds. The wood-effect finish is applied to ABS polymer blades rather than solid timber, reducing weight on the motor bearing and simplifying cleaning compared to natural wood. The white motor housing contrasts with the wood tones to create definition between the mechanical and decorative elements of the fitting.

The integrated LED sits behind a frosted diffuser ring encircling the motor hub, casting light downward and slightly outward across the ceiling plane. At 3200 lumens the output matches a typical 200W incandescent bulb or a 30-35W LED pendant, providing enough ambient light for general room use without requiring additional ceiling fittings. The tuneable white function allows the colour temperature to shift to cooler tones (4000-5000K) during daytime for task-focused environments, then warm to 2700-3000K in the evening for relaxed ambient conditions.

What ceiling height is needed for safe installation?

The Nemo M requires a minimum ceiling height of 2.4m to maintain safe blade clearance above head height. The fan drops 250mm from the ceiling, and the blade tips sweep a 1220mm diameter circle during operation.

Can the colour temperature and brightness be adjusted independently?

Yes. The remote control allows independent adjustment of the LED colour temperature (2700K to 5000K) and brightness (0-100% dimming), as well as separate control of fan speed (six settings including off).

How is the fan mounted to the ceiling?

The Nemo M uses a standard ceiling mount bracket that fixes to a ceiling joist or reinforced ceiling position. The motor housing then slots onto the bracket and locks into place. Professional installation is recommended due to the 3.95kg weight and electrical connection requirements.

Are the blades reversible for winter and summer operation?

The Nemo M operates in one rotational direction. Some ceiling fans include a reverse function to push warm air downward in winter, but this model does not feature directional switching. Fan speed adjustment provides control over airflow intensity across seasons.