Description
The Murlwick curved arm outdoor wall light hangs its glass lantern from a sweeping metal arm, so the light sits 260mm clear of the wall and casts further across a path or driveway than a flush mounted fitting would. It is 298mm high and 103mm wide, finished in textured black with clear glass panes, and weighs 0.9kg. The IP44 rating means splashing rain is no problem, so this exterior wall light can be fitted on an exposed wall as well as beneath a porch or a canopy. One E27 lamp rated up to 10W in LED sits inside the lantern.
The arm is what makes this version useful. Mounted above a door, the lantern hangs out over the step rather than sitting behind you, which puts light on the keyhole and the threshold instead of the wall. On a driveway or beside a garage the reach helps light the ground where you actually walk. Clear glass leaves the lamp visible, so a warm filament LED reads as a traditional lantern while a plain opal lamp keeps glare down at eye level. Fit a pair either side of a wide door, or space them along a boundary wall to mark a route through a garden.
Arm, canopy and lantern are metal in a textured black finish, with clear glass panes. The texture is practical outdoors, hiding the water spotting and dust that a smooth finish would show. Wipe the glass and body with a damp cloth and dry them off two or three times a year, more often in coastal or salty air, and keep abrasive pads and solvent cleaners away from the finish. It is Class 2 double insulated, so no earth connection is required, though outdoor wiring should be left to a qualified electrician. A flush industrial Murlwick outdoor wall light completes the range.
Specification
| Bulb Fitting |
1 x E27 |
| Maximum Wattage |
10W (10W per lamp) |
| IP Rating |
IP44 |
| Class |
Class 2 (double insulated) |
| Projection |
260mm |
| Height |
298mm |
| Width |
103mm |
| Weight |
0.9kg |
| Materials |
Glass & Metal |
| Finish |
Black Clear |
| Warranty |
2 Year |
Frequently Asked
Is it suitable for outdoor use?
Yes. The IP44 rating protects it against splashing water from any direction, so it can go on an open wall or under a porch.
How far does the arm reach?
The lantern sits 260mm out from the wall, with an overall height of 298mm and a width of 103mm.
What materials are used?
Metal in a textured black finish for the arm and lantern frame, with clear glass panes.
Which bulb does it take?
One E27 screw fit lamp rated up to 10W in LED. Filament style lamps suit the clear glass; opal lamps reduce glare.
How should I clean it?
A damp cloth on the glass and body, dried off afterwards, two or three times a year. Avoid abrasive pads and solvent cleaners.
Where is the best place to fit it?
Above a door, beside a garage or along a driveway, mounted about 1.8m to 2m up so the lantern throws light onto the ground.