Description
Our Mirrored Wavy Ribs 3D wall panels bring slow, flowing movement to a bare wall. Each white PVC panel carries four narrow raised ribs that run from top to bottom in broad, uneven S-curves, the left pair mirroring the right pair across the centre line. The ribs swell where they bend and taper to fine tips at the edges, with the outer two curling into hooks at the top and the inner two at the bottom, and plain flat ground left open between them. The relief is 12mm deep, enough for the rounded ribs to catch soft shadows without the pattern feeling heavy. Each panel is a 50 x 50cm square, so the curves sit at a comfortable scale on a full wall.
These panels suit interior walls in homes, offices, hotels and shops. A run of them behind a bed, along a living room wall or behind a reception desk makes a feature wall with a gentle rhythm, the pairs of ribs repeating panel after panel. The look changes with the light. When it falls from one side, from a window or a wall light, the ribs throw longer shadows along one flank and the S-curves read strongly; under even, overhead light they soften into a quiet ripple across the white. For working out how many you need, four panels cover one square metre.
Each panel is made from a 0.8mm sheet. Fitting needs no special equipment: spread adhesive over the back, press the panel onto the wall, then fill the joins with filler and wipe them clean. The panels cut to fit, so you can trim them around corners, sockets and the ends of a run. Adhesive and filler are sold separately. The PVC is waterproof and low maintenance, and a damp cloth is all it needs to wipe clean. For styling, pair them with plain, pale furnishings so the curves have room to read.
Specification
| Pattern |
Mirrored Wavy Ribs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
12mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Mirrored Wavy Ribs pattern look like?
Four narrow raised ribs run down each panel in broad S-curves, with the left pair mirroring the right pair and flat white ground between them.
How big is each panel and how much wall does it cover?
Each panel is a 50 x 50cm square, and four panels cover one square metre, which makes planning the number you need for a wall straightforward.
How are the panels fixed to the wall?
You spread adhesive across the back of each panel and press it firmly onto the wall, and no special equipment is needed for the job.
What else do I need to fit the panels?
You will need to buy adhesive to fix the panels and filler for the joins, as both of these are sold on their own.
Can I cut the panels to fit my wall?
Yes, they cut to fit, so you can trim them to work around corners, sockets and the ends of a run before fixing them.
How do I clean the panels once they are up?
The PVC is low maintenance and wipes clean with a damp cloth, which is all the regular care these white panels need.