Description
The Mirage is a 58cm flush ceiling light with an integrated 17.5W LED module behind an acid-etched white blown glass diffuser, mounted on a powder-coated white metal base. The LED casts warm 3000K light through the etched glass, turning the entire disc into a soft light source rather than projecting a directional beam. The fitting mounts to ceiling or wall via a screwless fixing system that hides all visible fixings once installed.
Designed for living rooms, dining areas, large hallways and bedrooms with standard 2.4m ceiling heights, the Mirage provides general ambient lighting across 15-20m² rooms. The 58cm diameter gives enough light spread to act as a primary ceiling fitting in these spaces, while the low-profile flush design suits rooms where a pendant would hang too low or where ceiling height is limited. The wall-mount capability allows the fitting to be used as high-level ambient lighting in corridors or as a bedhead light where a traditional wall light would be too small.
The acid-etched blown glass diffuser softens the LED array beneath and hides the internal components from view when the light is off, presenting as a clean white disc against the ceiling. The powder-coated metal base matches the white finish of the glass, creating a unified appearance. The integrated LED module is replaceable if it fails after the typical 25,000-30,000 hour lifespan, extending the usable life of the fitting beyond what most integrated LED fittings offer. The IP20 rating restricts use to dry indoor locations only.
Specification
| Diameter (mm) |
585 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Bulb Type |
LED |
| Colour Temperature |
3000K |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
Is the Mirage dimmable?
No. The integrated LED module is non-dimmable and runs at full 17.5W output on 230V mains. Pairing with a dimmer switch will cause flicker or failure.
Can it be mounted on a wall?
Yes. The screwless fixing system supports both ceiling and wall mounting. Wall-mounting is common in corridors, large hallways or as bedhead lighting where a traditional wall light would be undersized for the space.
What room size does it suit?
The 17.5W 3000K LED and 58cm diameter provide enough light spread for rooms of 15-20m². This typically covers a 4m x 5m living room, a 3.5m x 4m bedroom, or a similar-sized dining area with standard 2.4m ceilings.
Can the LED module be replaced?
Yes. The integrated LED module is replaceable if it fails, which extends the usable life of the fitting beyond most integrated LED designs. Contact Ideal Lux or Niori for replacement module availability once the LED reaches end of life.