Marmol LED Wall Light 20W 3000K - White Marble Effect

The Marmol is a 419mm horizontal LED wall light built around a layered oval form with a white marble-effect panel set against a white outer frame. An integrated 20W LED sits behind the marble panel, casting 1800 lumens of 3000K warm white light forward and diffusing through the translucent surface at a 120° beam angle.

Designed for corridors, bedrooms, living room accent walls and hallways, the Marmol provides general ambient lighting in spaces where a ceiling fitting is impractical or where wall-mounted light adds architectural interest. The 54mm projection from the wall keeps the fitting relatively low-profile, while the 419mm width suits walls between 1-3m wide without dominating the space. The fixture mounts on a standard UK back plate and connects to mains 220-240V wiring.

The white marble-effect panel is a printed acrylic or polycarbonate surface replicating natural marble veining in grey and white tones. The outer white frame wraps around the marble panel in a stepped oval, creating depth and a shadow line between the two layers. The non-dimmable LED is rated at 1800 lumens, comparable to a traditional 120W incandescent or 25W compact fluorescent in light output, making it suitable for primary lighting in a 10-12m² bedroom or supplementary lighting in larger living areas.

The Marmol carries a 3-year manufacturer warranty and weighs 0.6kg once installed. The LED is integrated into the fixture and not user-replaceable, but at 20W and rated for 25,000+ hours of operation, the fitting should provide 10-15 years of typical domestic use before the LED output degrades noticeably.

Is the Marmol dimmable?

No. The integrated 20W LED is non-dimmable and must be connected to a standard on/off switch circuit. Connecting it to a dimmer circuit may cause flickering or prevent the light from operating.

What size room does 1800 lumens suit?

1800 lumens is roughly equivalent to a 120W incandescent bulb and provides sufficient light for a 10-12m² bedroom or home office as a primary source, or supplementary ambient lighting in larger living rooms and hallways when paired with other fittings.

Is the marble panel real stone?

No. The marble-effect finish is a printed acrylic or polycarbonate panel that replicates natural marble veining. This keeps the weight low (0.6kg total) and allows light to diffuse through the surface, which solid marble would not.

Can the LED be replaced when it fails?

The LED is integrated into the fixture and not user-replaceable. However, the 20W LED is rated for 25,000+ hours of operation, which translates to 10-15 years of typical domestic use at 4-6 hours per day before noticeable degradation.