Maremagnum 2 Light Wall Light With Switch - Polished Chrome

The Maremagnum is a 2-light wall fitting with a sculptural polished chrome frame of interlaced curved metal strands, paired with two clear glass globes housing G9 bulbs. The frame measures 300mm wide by 120mm high and projects 150mm from the wall, with an inline switch on the cable allowing the fitting to be turned on and off without requiring a wall switch circuit.

Designed for hallways, living room feature walls, bedrooms and dining areas where decorative wall lighting is needed without ceiling installation, the Maremagnum provides ambient and accent light through the clear glass globes. The sculptural chrome frame reflects light from the bulbs and from other light sources in the room, adding visual depth when lit and when off. The 150mm projection suits most standard room depths without dominating narrow hallways.

The polished chrome finish is achieved through multi-stage buffing and plating, producing a high-gloss reflective surface that pairs with both warm-toned and cool contemporary interiors. Each globe is hand-blown clear glass with a faceted geometric cut that disperses light in multiple directions rather than casting it as a single beam. The 1.2kg weight is distributed across the full 300mm width of the backplate, reducing stress on any single fixing point during installation.

The inline switch sits on the power cable approximately 200mm from the backplate, allowing the light to be controlled locally without wiring to a wall switch circuit. This makes the Maremagnum suitable for rooms where adding a switched circuit would require re-wiring, or for bedside wall lighting where a cable-mounted switch is more accessible than a wall switch.

What bulbs does it take and are they included?

The Maremagnum takes two G9 capsule bulbs, sold separately. Most users pair this with LED G9 bulbs between 2W-5W in warm white (2700K-3000K) for ambient lighting or daylight (4000K-5000K) for task lighting.

Is it dimmable?

Yes, if you fit dimmable G9 bulbs and connect the fitting to a compatible dimmer switch. The inline cable switch is an on/off switch only and does not provide dimming control itself.

Where is the inline switch located?

The switch sits on the power cable approximately 200mm from the wall backplate, allowing the light to be turned on and off without requiring a wall-mounted switch circuit. This is useful for bedside wall lighting or rooms where adding a switched circuit would require re-wiring.

How is the polished chrome finish maintained?

Wipe gently with a dry microfibre cloth to remove dust. For fingerprints or smudges, use a barely-damp cloth with distilled water, then dry immediately. Avoid abrasive cleaners or polishes that can scratch the chrome plating.