Description
A slim bar of light for the Magneto magnetic system, this head sits down onto the live track and reads as part of it. The COB LED behind the lens throws a continuous line rather than a row of dots, drawing 18W at a warm white 3000K that stays kind to timber, plaster and paint. The housing runs to 370mm, narrow enough to look like a shadow line overhead when it is switched off, and the driver is built in.
It earns its place where you want light along something rather than at it: a run of worktop, a bookcase, a corridor hung with pictures, a long dining table. The beam is tight enough to keep the spill controlled, so two or three heads set down a track read as deliberate stripes of light instead of a general flood. We reach for a linear head like this in kitchens where pendants would crowd the sightline, and in rooms where the ceiling is the only sensible place left to light from. Warm white suits living spaces and evening use, and it is the temperature we pick for anywhere people sit for long.
Black runs the whole length of the housing, so it vanishes against dark track and stays quiet against a white ceiling. Output is fixed, with no dimming. Keep the system switched off, then wipe the lens with a dry cloth and lift dust off the body with a soft brush; nothing damp and nothing abrasive on the optic. It carries a three year warranty. We stock the surface and recessed tracks, the corner joints and the end caps in the same black, so a lit line can be built up, turned into a corner or run wall to wall without a change of finish. The LED is integral, so there is no lamp to buy.
Specification
| Colour |
Black |
| Weight |
0.30KG |
| Length |
370mm |
| Width |
23mm |
| Height |
42.7mm |
| Materials Used |
Aluminium, Copper, Plastic |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamp |
18W integrated LED (no lamps to fit) |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Brand |
OSRAM |
| Qty of SMD |
1 |
| LED Power |
18W (±5%) |
| LED Voltage |
36V (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
50° |
| System Flux |
1440lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
DC48V |
| Constant Voltage Output |
DC48V |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
18W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How long is the light itself?
The housing measures 370mm long, 23mm wide and 42.7mm high, and weighs 0.3kg.
How much light does it give out?
1440 lumens from an 18W COB LED, at 3000K warm white with a colour rendering index of 80 or better.
Can it be dimmed?
No. This head is non-dimmable and runs at full output whenever the track is live.
Does it need a separate driver?
No, the driver is integral. It runs on the Magneto low voltage track at 36V and needs an earth connection at the supply end.
Which tracks does it work with?
The Magneto track range, available in shallow surface, deep surface and recessed forms in one metre lengths, all in black.
How should I clean it?
Switch the system off first, then dust the body with a soft brush and wipe the lens with a dry cloth. Avoid solvents and damp cloths on the optic.