Description
This is a slim black bar of light for the Magneto magnetic track range, giving a continuous warm line rather than a row of spots. The COB LED behind the lens draws 12W and sits at 3000K, a warm white that flatters wood, brick and painted plaster. At 250mm it is a compact head, easy to place along a run and easy to move later. The LED and its driver are built in. It is not a dimming fitting, so it comes on at full output with the circuit.
We reach for linear heads like this where light needs spreading rather than aiming: along a kitchen shelf, over a worktop, above a desk, or down a hallway where spots would leave scallops on the wall. The fairly tight beam keeps light on the surface you want lit and off the ceiling. It suits anyone building a track layout in stages, since heads can be added and rebalanced as a room changes. Keep it to dry indoor rooms; it is not one for a bathroom zone or a covered porch.
The body is black throughout, so it reads as a dark line on a pale ceiling and all but vanishes against a dark one. To clean, switch the circuit off and run a dry cloth along the housing and the lens; abrasives and sprays will only mark the finish. It carries a three year warranty. The rest of the range is black to match, with surface and recessed track, L-joints for turning a corner or running wall to wall, and end caps to close off an open run, so a layout can be drawn to fit the room. The LED is integral, so there is no lamp to change.
Specification
| Colour |
Black |
| Weight |
0.20KG |
| Length |
250mm |
| Width |
23mm |
| Height |
427mm |
| Materials Used |
Aluminium, Copper, Plastic |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamp |
12W integrated LED (no lamps to fit) |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Brand |
OSRAM |
| Qty of SMD |
1 |
| LED Power |
12W (±5%) |
| LED Voltage |
36V (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
50° |
| System Flux |
960lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
DC48V |
| Constant Voltage Output |
DC48V |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
12W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does this head put out?
It gives 960 lumens from a 12W integral LED, at 3000K warm white.
How big is it?
The bar measures 250mm long and 23mm wide, so it sits neatly within a slim track run.
Can I dim it?
No. This head is non-dimmable and runs at full output whenever the circuit is on.
Do I need to buy a separate driver?
No, the driver is included. The head runs on the track's 36V low voltage supply.
Is the LED replaceable?
It is integral rather than a changeable lamp, with an average life of 30,000 hours.
Can it be used in a bathroom or outdoors?
No. It is rated IP20, which means dry, indoor positions only.