Description
A small disc head for the Magneto low voltage track system, made to sit on the track and throw a controlled pool of warm white light wherever you aim it. The disc face is 75mm across, carried on a short stem and arm so the beam can be turned along a run or tipped down onto a surface. The LED sits behind the face and the driver is built in, drawing 10W and giving 800 lumens in a warm tone that reads as household light rather than office light. Output is fixed, so it switches on at full brightness with no dimming.
This is the head we pick when a room wants light placed rather than spread: over a kitchen worktop, along a shelf of books or bottles, across pictures in a hallway, or picking out a fireplace. Because the head moves on the track, the lighting can be re-thought when furniture shifts, which makes it useful in open plan rooms and in studies where the desk never quite stays put. We would use several along one run at even spacing, and we would keep them for dry indoor rooms; a bathroom or a porch asks for a different fitting altogether.
The body and disc are finished in black throughout, including the stem and arm, so the head reads as one quiet shape against a dark track and stays visible without shouting against a pale ceiling. For upkeep, cut the power and let the head lose its heat, then take dust off the face and arm with a dry cloth; no polishes, no solvents, and nothing wet near the contacts. It carries a three year warranty. The same range gives you the track itself in surface, pendant depth and recessed profiles, plus corner joints and end caps in matching black, so a run can be planned to fit the room rather than the other way round.
Specification
| Colour |
Black |
| Weight |
0.30KG |
| Length |
200mm |
| Width |
75mm |
| Diameter |
75mm |
| Height |
150mm |
| Materials Used |
Aluminium, Copper, Plastic |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamp |
10W integrated LED (no lamps to fit) |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Brand |
BRIDGELUX |
| Qty of SMD |
1 |
| LED Power |
10W (±5%) |
| LED Voltage |
12V (±5%) |
| Type of LED |
SMD |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
50° |
| System Flux |
800lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Multiple Directions |
| Driver Included |
Yes |
| Type of Driver |
DC48V |
| Constant Voltage Output |
DC48V |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
10W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does one head give?
Around 800 lumens from a 10W integrated LED, at 3000K warm white. That is enough for one worktop zone or a picture, so most runs use two or more heads.
Can it be dimmed?
No. This head is non-dimmable and runs at full output whenever the circuit is on.
How big is it?
The disc is 75mm in diameter and the head stands about 150mm tall on its arm, weighing 0.3kg, so it stays visually light on a slim track.
Is the LED replaceable?
No, the LED is integral and rated for around 30,000 hours of use, so there is no lamp to change.
Where should it not be used?
It is IP20, which means dry interiors only. Keep it out of shower rooms, utility areas with steam and any covered outdoor space.
How do I clean the disc face?
Switch off at the wall, wait until the head is cool to touch, then wipe with a soft dry cloth. Avoid sprays and cleaning fluids on the face.