Description
A slim black bar rather than a cone on a stalk, this head runs 200mm end to end and throws a narrow line of warm white light. The LED is built in and the driver comes with it, drawing 10W for roughly 800 lumens, so the whole thing stays compact on the track. There is no dimming: it comes on at a single level and stays there.
We reach for a linear head where a line of light does more work than a scatter of spots: along a kitchen worktop, over a long table, or washing down a run of shelves and framed prints. The beam is tight enough to keep light on the surface you want lit and off the ceiling, which suits open plan rooms where the track is in view. It needs an earthed supply and belongs indoors, in rooms that stay dry.
The body is black on every face, so a row of them reads as a continuous line against a black track instead of a series of interruptions. Cleaning wants a cold fitting: isolate the circuit, give the housing and the lens a wipe with a dry cloth, and keep sprays, polish and kitchen degreasers well away from the optic. It carries a three year warranty. The rest of the range is in the same black, which is why runs built from it look deliberate: shallow and deep surface tracks, a recessed track, L-joints for turning a corner or carrying light wall to wall, and end caps to close the ends off. We stock the heads and the track parts together, so you can work out the length you need and order the pieces in a single order. The LED is part of the fitting, so there is no lamp to change.
Specification
| Colour |
Black |
| Weight |
0.40KG |
| Length |
200mm |
| Width |
25mm |
| Height |
140mm |
| Materials Used |
Aluminium, Copper, Plastic |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamp |
10W integrated LED (no lamps to fit) |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| No. of Switching Cycles |
30000 |
| Average Life of LED (hrs) |
30000hrs |
| LED Brand |
BRIDGELUX |
| Qty of SMD |
1 |
| LED Power (W) |
10W (±5%) |
| LED Voltage (V) |
18V (±5%) |
| Type of LED |
SMD |
| Lumens Per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle (°) |
50° |
| System Flux (lm) |
800lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Multiple Directions |
| Driver Included |
Yes |
| Type of Driver |
DC48V |
| Constant Voltage Output (V) |
DC48V |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
10W (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life (hrs) |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What are the dimensions of this head?
It measures 200mm long, 25mm wide and 140mm high, and weighs 0.4kg.
What is the light like?
It is 3000K warm white with a colour rendering index of 80, and the beam is a 50 degree spread, giving a defined band of light rather than a wide wash.
How much light does it give, and how long should it last?
800 lumens from 10W, with an average rated life of 30,000 hours.
Can I dim it?
No. This head runs at a fixed output, so it should not be wired to a dimming control.
Is there a lamp or driver to buy separately?
No. The LED is integrated and the driver is supplied with the fitting.
Can it be used in a bathroom or outside?
No. It is rated IP20, so keep it to dry indoor rooms away from splashes and damp.