Description
This is a black linear connector with a 2m suspension, made for the Luxeon up and down magnetic track. It joins two straight lengths of that track end to end and hangs the join from the ceiling, so a long run hangs as one continuous line. You receive the connector, its suspension wire and a small ceiling canopy. The track and the track lights are not included and are sold separately. The connector is 11.5cm long and 2.3cm deep, and the kit measures 2.1m in height overall.
It suits anyone planning a suspended run of up and down track longer than a single length. An up and down track sends light upwards as well as down, which is why it is hung on suspensions rather than fixed flat to the ceiling, and this kit holds each straight join in the air. The rule is simple: you need one kit for each straight join, so a run of three lengths laid end to end takes two kits. Counting the joins before you order means no join is left without its kit on the day.
The connector has a black finish, and the whole kit weighs 0.27KG. The track it joins runs at 48V DC, and this kit is made for the on/off version of the up and down track only, so check that your track is that version before you order. As with any lighting system fed from the mains, a qualified electrician should install the track and its suspensions. One practical point: the 2m suspension sets how far below the ceiling the join can hang, so measure your ceiling height first and keep the drop in mind when planning the run.
Specification
| Connector Length |
115mm |
| Connector Depth |
23mm |
| Overall Height |
2100mm, with the suspension |
| Suspension Cable |
2m |
| Track Voltage |
48V DC |
| Track Version |
On/Off |
| Use |
One kit for each linear connection |
| Finish |
Black |
| Certification |
CE |
| Weight |
0.27KG |
| Warranty |
5 Years |
Frequently Asked
What does this track connector do?
It joins two straight lengths of the Luxeon up and down magnetic track end to end and hangs that join from the ceiling on a 2m suspension.
How many connector kits do I need for my track run?
You need one kit for each straight join between two lengths of track, so a run of three lengths laid end to end takes two kits.
Is the track included with the connector?
No. The track and the track lights are sold separately. In the box you receive the black connector, its suspension wire and a ceiling canopy.
Will this connector work with any version of the up and down track?
It is made for the on/off version of the up and down magnetic track, which runs at 48V DC, so check your track is that version before you order.
How big is the connector and how long is the suspension?
The connector is 11.5cm long and 2.3cm deep, the suspension is 2m long, the kit measures 2.1m in height overall and it weighs 0.27KG.