Description
The Lunar is a 450mm outdoor wall light with two E27 bulb fittings set behind dual satin-finished Pyrex glass diffusers, housed in a white painted die-cast aluminium body rated IP55 for weatherproof outdoor installation. The dual diffusers send light both upwards and downwards, creating a balanced wash of illumination across the wall surface without direct glare.
Designed for residential and commercial exterior use, the Lunar suits patios, garden walls, covered entrances, and terrace runs where ambient outdoor lighting is needed at heights of 1.5-2.5m above ground level. The 80mm wall projection keeps the fitting close to the building line, reducing obstruction risk along pathways. The IP55 rating provides protection against dust ingress and low-pressure water jets from any direction, making the fitting suitable for exposed positions under eaves, pergolas, or against garden walls.
The die-cast aluminium construction gives the fitting structural resilience against impact and thermal cycling across outdoor temperature ranges, while the white painted finish resists fading under prolonged UV exposure. The Pyrex diffusers are heat-resistant borosilicate glass, handling the thermal load from standard or LED E27 bulbs up to the manufacturer's maximum wattage. The dual-bulb configuration provides redundancy if one bulb fails and allows asymmetric output by pairing bulbs of different wattages or colour temperatures. The fitting accepts dimmable bulbs when paired with an appropriate outdoor-rated dimmer circuit.
Specification
| Length (mm) |
450 |
| Projection (mm) |
80 |
| Dimmable |
Yes |
| Number Of Bulbs |
2 |
| Bulb Type |
E27 |
| IP Rating |
IP55 |
| Warranty |
5 Years |
Frequently Asked
What does the IP55 rating mean?
IP55 provides protection against dust ingress and low-pressure water jets from any direction. The Lunar can be installed on exposed exterior walls, under eaves, or in covered outdoor areas where it may be subject to rain, but it is not designed for full immersion or direct high-pressure hosing.
What bulbs does it take?
The Lunar takes two standard E27 (Edison screw) bulbs. Bulbs are sold separately. Most users pair this with warm-white LED bulbs between 6-10W and 2700K-3000K for outdoor ambiance. Check the manufacturer's maximum wattage rating before fitting higher-output bulbs.
Can it be used on a dimmer circuit?
Yes, provided you use dimmable E27 bulbs and pair the circuit with an outdoor-rated dimmer switch compatible with the bulb type. The fitting itself is dimmer-compatible, but the bulbs must also support dimming.
How is it mounted?
The Lunar mounts to a standard outdoor wall box with screws concealed behind the die-cast aluminium backplate. The 80mm projection places the centre of the diffusers approximately 40mm from the wall surface once installed.