Lucenza LED Halo Ring Alabaster Chandelier 600mm - Brushed Brass

The Lucenza is a 600mm halo ring chandelier built around a continuous band of natural Spanish alabaster set inside a brushed brass ring. An integrated LED runs the full circumference of the ring, lighting the alabaster segments from within and pushing warm 3000K light outward through the stone. The fixture suspends from a brushed brass canopy on three fine adjustable cables, with a slim 70mm profile that keeps the ring reading as a floating circle rather than a heavy shade.

Designed for dining tables, kitchen islands, entrance halls and open-plan living spaces with ceiling heights of 2.6m or higher, the Lucenza works as both ambient and decorative lighting. The 1500mm cable drop is adjustable on installation, allowing the ring to sit 700-800mm above a dining table or higher in a hallway or stairwell. The cables conceal the wiring run between the canopy and the ring, keeping sightlines clean from below.

Each alabaster segment around the ring is cut from natural stone, so the veining and tonal variation differ between segments and between individual chandeliers. When the LED is lit, the mineral patterns within the alabaster become visible as the light passes through, breaking what would otherwise be a uniform band into a more textural circle of light. The brushed brass outer ring frames the alabaster and softens reflections under daylight.

The 600mm diameter suits dining tables seating 6-8, kitchen islands of 1.8-2.4m in length, and round entrance hall ceilings where the ring can be centred above a console or rug. For larger rooms or longer tables, the Lucenza is also produced in larger ring diameters within the same range.

What size table or island does the 600mm ring suit?

The 600mm diameter works well above dining tables seating 6-8 people and kitchen islands of approximately 1.8-2.4m in length. For larger tables or wider islands, a bigger ring diameter from the Lucenza range is usually a better proportion.

Is the Lucenza dimmable?

The integrated LED runs on 230V mains. Dimmer compatibility depends on the specific dimmer used, so please contact us before pairing with a dimmer to confirm suitability for this fitting.

What ceiling height is needed?

The 1500mm cable drop is adjustable on installation. The chandelier suits ceiling heights of 2.6m or above, with the ring typically set 700-800mm above a dining table or kitchen island. In hallways and stairwells the cables can be left longer for a deeper drop.

Does the alabaster vary between pieces?

Yes. Each alabaster segment is cut from natural Spanish stone, so the veining, tonal variation and translucency differ between segments and between individual chandeliers. This is a feature of the natural material rather than a defect.