Loop 3 Light Flush Ceiling Light - Antique Brass

The Loop is a 3-light flush ceiling light built around curved antique brass arms that flow from a central ceiling plate in overlapping arcs, each supporting a frosted and clear glass sphere at its end. The three G9 bulb fittings (bulbs sold separately) sit inside the spheres, which feature frosted opal line detailing on the lower half and clear glass above, diffusing the light output while showing the bulb shape through the upper section.

Designed for rooms with ceiling heights below 2.4m where a pendant would hang too low, the Loop mounts flush to the ceiling with a 200mm total drop from ceiling to lowest point. The 280mm diameter suits hallways, compact bedrooms, landings, and small living rooms needing overhead light without visual bulk. The curved brass frame gives the fitting presence without the mass of a traditional multi-arm chandelier, and the antique brass finish adds warmth to neutral and earth-toned interiors.

The brass frame is finished in an antiqued tone that sits between polished brass and aged bronze, showing subtle tonal variation across the curved sections where the antiquing settles into the recesses. The frosted glass spheres are hand-blown, so minor bubbles and thickness variation are characteristic of the manufacturing process. The 1.6kg weight requires secure fixing to a standard UK ceiling rose rated for the load, and the fitting accepts dimmable G9 LED or halogen bulbs when paired with a compatible dimmer switch.

What bulbs does it take?

The Loop takes three G9 capsule bulbs, sold separately. Most users pair this with G9 LED bulbs between 3-5W and 2700K-3000K warm white for hallway or bedroom use. Halogen G9 bulbs are also compatible but run hotter and use more power.

Is it suitable for low ceilings?

Yes. The 200mm total drop from ceiling to lowest point makes the Loop well-suited to rooms with ceiling heights below 2.4m, where a pendant would hang too low or create a visual obstruction.

Is it dimmable?

Yes, when paired with dimmable G9 bulbs and a compatible dimmer switch. LED G9 bulbs require an LED-compatible dimmer to avoid flickering.

How is the antique brass finish applied?

The brass frame is treated with an antiquing process that creates tonal variation, with darker tones settling into the recesses of the curved sections. This finish will show minor variation between individual fittings depending on how the antiquing agent reacts with the brass alloy.