Leaf Scroll Medallion 3D PVC Wall Panels 50 x 50cm - White

Our Leaf Scroll Medallion 3D wall panels bring a classic, ornamental pattern to a plain wall. Each white PVC panel is a 50cm square with one large medallion at its heart: a four-pointed, diamond-shaped rosette of serrated leaves around a small textured round boss, ringed by mirrored curling leaf scrolls that reach almost to every edge. Quarter scrolls fill the four corners inside a thin border line, so the motif repeats once per panel and the medallions line up in a steady grid across the wall. The scrolls and leaves stand out in a relief 12mm deep, rounded and soft rather than sharp.

They suit interior walls in homes, offices, hotels and shops, and a run of them makes a feature wall behind a bed, along a hotel corridor or behind a shop counter. The relief is moderate, so its shadows are soft: in even daylight the pattern reads quietly, white on white, while light falling from a window or lamp to one side picks out each curling leaf and the textured centre more clearly. Four panels cover one square metre, which makes it simple to work out how many your wall needs before you order.

Each panel is formed from a 0.8mm PVC sheet, and PVC is waterproof. To fit, spread adhesive on the back and press the panel onto the wall; panels can be cut to fit at the edges, and the joins are filled with filler and wiped clean, with no special equipment needed. Adhesive and filler are sold separately. Day to day, a wipe with a damp cloth is all they need, which keeps them low maintenance. For a balanced feature wall, we suggest centring the first medallion on the middle of the wall and working outwards, so any cut panels fall evenly at each end.

What does the Leaf Scroll Medallion pattern look like?

Each panel carries one large medallion: a diamond-shaped rosette of serrated leaves with a small textured boss at its centre, ringed by mirrored curling scrolls, with quarter scrolls in the corners inside a thin border.

How big is each panel and how much wall does it cover?

Each panel is a 50 x 50cm square, and four of them cover one square metre, so you can plan your order from your wall's measurements.

How are these 3D wall panels fixed to the wall?

You spread adhesive across the back of each panel and press it firmly onto the wall, then fill the joins and wipe them clean. No special equipment is needed.

Do I need anything else to fit them?

Yes, you will need adhesive for the backs of the panels and filler for the joins, and both are bought on their own rather than coming with the panels.

Can I cut the panels to fit my wall?

Yes, the panels can be cut to fit, so you can trim them neatly where your feature wall meets a corner, the ceiling or the skirting.

How do I keep the panels clean?

A wipe with a damp cloth is all they need. The PVC is waterproof, so they are easy to look after and low maintenance.