Description
Our Layered Offset Blocks 3D wall panels bring the order of brickwork to a wall in a cleaner, more architectural form. Smooth, flat-faced rectangular blocks are laid horizontally in staggered rows, some running about a third of the panel's width and some about half, and each one is stepped to its own depth, with a few set back as recessed slots. Three full-width horizontal channels divide every panel into four bands of blocks. Each panel is white PVC and a 50 x 50cm square.
They suit interior walls in homes, offices, hotels and shops, and they work best as a feature wall: behind a bed or a sofa, along a reception desk or behind a shop counter. With a relief 15mm deep, the pattern changes with the light. When light falls across it from the side, from a window or a wall light, each stepped block throws a fine shadow line and the recessed slots read as dark lines, giving the wall real depth. Under even light from the front, the blocks settle into a quiet, layered texture that sits comfortably in modern and minimal rooms. Four panels cover one square metre, which makes working out how many a wall needs straightforward.
Each panel is formed from a 0.8mm PVC sheet, and PVC is waterproof. Fitting needs no special equipment: spread adhesive on the back of a panel and press it onto the wall, cut panels to fit where the wall ends, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. They are low maintenance, and a damp cloth is all it takes to keep them clean. For a calm room, pair the layered blocks with warm timber, linen and plants, which soften the crisp lines without competing with them.
Specification
| Pattern |
Layered Offset Blocks |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Layered Offset Blocks pattern look like?
It is made up of smooth rectangular blocks laid horizontally in staggered rows, stepped to different depths with some recessed slots, and split into four bands by three full-width channels.
How big is each panel and how many will I need?
Each panel measures 50 x 50cm, and four of them cover one square metre, so measure your wall in square metres to work out how many to order.
How are the panels fixed to the wall?
You spread adhesive over the back of each panel and press it onto the wall, cutting panels to fit at the edges, then fill the joins with filler and wipe them clean.
Do I need to buy anything else to fit them?
Yes. The adhesive that holds them to the wall and the filler for the joins are both sold separately, and no special equipment is needed for the job.
Where can I use these 3D wall panels?
They are made for interior walls in homes, offices, hotels and shops, and they make a particularly good feature wall in a living room, bedroom or reception area.
How do I clean the panels?
They are low maintenance: a wipe with a damp cloth is all they need to stay clean, and the PVC they are made from is waterproof.