Description
Our Layered Dune Waves 3D wall panels bring the soft drift of sand dunes to a plain wall. About ten broad horizontal bands run the full width of each panel, rising and falling in long, gentle curves and stacked in overlapping layers, each band following the curve of its neighbour as it widens and narrows. Each band steps cleanly down onto the next in a relief 10mm deep, enough to give every edge a soft shadow without the wall feeling busy. The panels are white PVC, each a 50 x 50cm square.
These panels are made for interior walls in homes, offices, hotels and shops. They work well as a feature wall behind a bed or sofa, along a hallway or behind a shop counter, where the gentle waves give a large plain surface some movement. The pattern changes with the light. With daylight coming from a window to one side, the stepped edges pick up a clear line of shadow and the dunes look deeper, while soft overhead lighting keeps the effect calm and even. Laid with the bands running horizontally, the waves draw the eye along the wall, which suits a long, low room or a corridor.
Each panel is made from a 0.8mm sheet. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall and cut panels to fit at the edges. Fill the joins with filler and wipe them clean for a tidy finish. Adhesive and filler are sold separately. When working out how many you need, four panels cover one square metre. Being PVC, the panels are waterproof, so care is low maintenance: wipe the surface with a damp cloth. For styling, keep nearby furnishings simple and set a wall light or lamp to one side to bring out the waves in the evening.
Specification
| Pattern |
Layered Dune Waves |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
10mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Layered Dune Waves pattern look like?
Broad horizontal bands rise and fall in long, gentle curves across the full width of the panel, stacked in overlapping layers like sand dunes, with each band stepping down onto the next.
How do I work out how many panels I need?
Each panel is a 50 x 50cm square, so four panels cover one square metre. Measure your wall in square metres to plan your order.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel and press it onto the wall. No special equipment is needed for fitting.
Is adhesive included with the panels?
No. You will need to buy adhesive for fixing and filler for the joins on their own, as neither comes with the panels.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit at the edges of your wall, and the joins between them are filled with filler and wiped clean for a neat finish.
How do I clean the panels?
Wipe them with a damp cloth. The PVC is waterproof, so the panels need very little maintenance from day to day.