Description
Our Large Triangular Facets 3D wall panels are white PVC with a bold, simple geometric pattern. Two straight crease lines fan out from near one corner, one running at about 45 degrees to just short of the opposite corner and the other at a shallower angle to the middle of the far edge. Together they divide each panel into three large, roughly triangular flat facets that span the whole square with no smaller repeat, inside a narrow bevelled border. Each panel is a 50cm square with a relief 15mm deep, so the facets sit as separate planes that catch side light at slightly different angles.
These panels are for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a bed or sofa, a reception wall or the wall behind a shop counter, anywhere you want pattern without busy detail. Because the facets are large, the design reads clearly from across a room, and set in rows the same fan of creases repeats panel after panel at a generous scale. As daylight or a wall light falls across the wall from one side, the crease lines show up crisply while the facets stay quiet and even.
Each panel is made from a 0.8mm PVC sheet, and PVC is waterproof. To fit them, spread adhesive on the back of each panel and press it onto the wall; panels can be cut to fit, and the joins are filled with filler and wiped clean for a continuous surface. No special equipment is needed. Adhesive and filler are sold separately. Four panels cover one square metre, a handy figure when working out how many a wall needs. A damp cloth keeps them clean, and they need little maintenance. For a restful room, pair them with plain furniture and let window light play across the facets.
Specification
| Pattern |
Large Triangular Facets |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Large Triangular Facets pattern look like?
Two straight crease lines fan out from near one corner, dividing each panel into three large, roughly triangular flat facets inside a narrow bevelled border, with no smaller repeat.
How big is each panel and how much wall does it cover?
Each panel is a 50 x 50cm square, so four panels cover one square metre of wall when you are planning how many to order.
How are the panels fixed to the wall?
You spread adhesive on the back of the panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do I need to buy anything else to put them up?
Yes. You will need adhesive to fix the panels and filler for the joins, and both are bought separately from the panels.
Can the panels be cut to fit my wall?
Yes. The panels can be cut to fit, so you can finish a row neatly where the wall ends or work around an edge.
How do I clean the panels?
Wipe them with a damp cloth. The white PVC is low maintenance and needs nothing more than that to look fresh.