Description
Our Large Tilted Diamonds 3D wall panels each set four big raised squares turned on point, so each reads as a diamond, in a two-by-two grid on a flat ground. Their corners almost meet, leaving a small flat diamond of ground at the centre, and each block has bevelled sides and rises higher on one edge, like a tilted wedge. The relief stands 30mm deep, enough for the blocks to throw clear shadows when light comes from the side. Each panel is white PVC and a 50 x 50cm square, so when panels sit side by side the diamonds line up into a steady repeating grid across the wall.
These panels are made for interior walls in homes, offices, hotels and shops. A feature wall behind a bed or sofa, a reception wall or the back of a shop display all suit the bold, geometric pattern. Because every block tilts, the light catches one face and leaves another in shadow, so the wall changes through the day: crisp and graphic under side light from a window, softer and calmer when lit head on. Four panels cover one square metre, which makes it simple to work out how many your wall needs.
The PVC is a 0.8mm sheet. To fit one, spread adhesive on its back, press it onto the wall, cut panels to fit where the wall ends, then fill the joins with filler and wipe them clean. No special equipment is needed. Adhesive and filler are sold separately. The panels are waterproof and low maintenance, so a wipe with a damp cloth keeps the relief looking fresh. For the best effect, run the panels across a full wall from corner to corner so the diamonds continue unbroken, and light them from one side with a wall lamp to bring out the tilt.
Specification
| Pattern |
Large Tilted Diamonds |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
30mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Large Tilted Diamonds pattern look like?
Four large raised squares turned on point sit in a two-by-two grid, each with bevelled sides and one edge higher than the other, so every block reads as a tilted diamond.
How do I work out how many panels my wall needs?
Each panel is a 50 x 50cm square and four of them cover one square metre, so measure your wall in square metres to work out how many to order.
How are the panels fixed to the wall?
Spread adhesive on the back of each panel and press it firmly onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Is anything else needed to fit them?
Yes, you will need adhesive to fix the panels and filler for the joins, and both of these are bought separately from the panels themselves.
Can the panels be cut to fit?
Yes, they cut to fit, so you can trim the last panels in a row to finish neatly at a corner, a ceiling or a skirting board.
How do I clean the panels?
The PVC is waterproof and low maintenance, so a wipe with a damp cloth is all the panels need to keep the relief looking fresh.