Large Pinwheel Circle 3D PVC Wall Panels 50 x 50cm - White

Our Large Pinwheel Circle 3D wall panels give a plain wall one bold geometric motif per panel. Each white panel carries a circle reaching almost to its edges, quartered by a straight vertical and horizontal cross. Four half-disc blades, each set along one arm of the cross, sweep round a small central hub like a pinwheel, while the corners outside the circle stay plain. The relief is 17mm deep and built in crisp stepped layers of flat planes, so the shadows it throws are narrow and sharply drawn rather than heavy. Each panel is a 50cm square, a size that keeps the motif large enough to read from across a room.

We see these panels on interior walls in homes, offices, hotels and shops, and they work hardest as a feature wall: behind a bed or sofa, along a hallway, or behind a reception desk. Laid side by side, the circles line up in neat rows, and the blades all turn the same way, giving the wall a sense of movement. When daylight or a wall light falls across it from one side, each stepped layer picks up its own thin line of shadow, and in softer, even light the pinwheels settle into a quieter pattern.

The panels are formed from a 0.8mm PVC sheet. To fit them, spread adhesive on the back of each panel and press it onto the wall, cutting panels to fit at the edges. Fill the joins with filler and wipe them clean; no special equipment is needed. Adhesive and filler are sold separately. Four panels cover one square metre, a handy figure when working out how many your wall needs. They are low maintenance: a wipe with a damp cloth is all they ask. For a calm, modern look, run the panels floor to ceiling on one wall and keep the furniture in front simple.

What does the Large Pinwheel Circle pattern look like?

Each panel carries one large circle, quartered by a straight cross, with four half-disc blades sweeping round a small central hub like a pinwheel, and plain corners outside the circle.

How big is each panel and how much wall do they cover?

Each panel measures 50 x 50cm, and four of them together cover one square metre of wall, which makes measuring up simple.

How are the panels fixed to the wall?

You spread adhesive across the back of the panel, press it firmly onto the wall, then fill the joins with filler and wipe them clean.

Do I need to buy anything else to fit them?

Yes, you will need adhesive to fix the panels and filler for the joins, as neither comes with the panels, but no special equipment is needed.

Can the panels be cut to fit my wall?

Yes, the panels can be cut to fit, so you can trim them where the wall ends and finish a run neatly at the edges.

How do I keep the panels clean?

A wipe with a damp cloth is all the panels need, so the white relief stays low maintenance from one day to the next.