Description
Our Large Irregular Pyramids 3D wall panels give a plain wall a crisp, faceted relief. Each white PVC panel is a 50cm square, filled with about a dozen irregular three- and four-sided cells set in a loose grid of three across and four down, with narrow flat channels between them. Every cell rises in flat, angled facets to an off-centre peak or ridge, so the surface has the look of cut crystal, and the pattern repeats only from one panel to the next. The relief is 22mm deep, enough for each sharp-edged plane to hold its own patch of light or shade.
These panels are made for interior walls in homes, offices, hotels and shops, and they come into their own on a feature wall: behind a bed or a sofa, along a reception desk or framing a shop display. Because the facets meet at sharp angles, light falling across the wall picks out every plane, setting bright faces against shaded ones, and the pattern shifts as daylight moves round the room. A lamp or wall light placed to one side throws the strongest contrast. Four panels cover one square metre, which makes it simple to work out how many your wall needs.
Each panel is formed from a 0.8mm PVC sheet, and because PVC is waterproof, a wipe with a damp cloth is all the cleaning it needs, keeping it low maintenance. Fitting takes no special equipment: spread adhesive across the back of each panel, press it onto the wall and cut panels to fit where the wall ends. Once they are up, fill the joins with filler and wipe them clean so the wall reads as one surface. Adhesive and filler are sold separately. Run the panels from floor to ceiling on a single wall and keep the walls either side plain, so the faceted pyramids have room to show.
Specification
| Pattern |
Large Irregular Pyramids |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
22mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Large Irregular Pyramids pattern look like?
About a dozen irregular three- and four-sided cells sit in a loose grid on each panel, each rising in flat, angled facets to an off-centre peak, so the wall looks like cut crystal.
What size is each panel and how much wall do they cover?
Each panel is a 50 x 50cm square, and four of them cover one square metre, which makes measuring up straightforward.
How are the panels fixed to the wall?
Spread adhesive on the back of the panel and press it firmly onto the wall. The panels can be cut to fit, and no special equipment is needed.
Is anything else needed to put them up?
Yes, you will need to buy an adhesive for fixing and a filler for the joins, because neither comes with the panels.
Where can the panels be used?
They are made for interior walls in homes, offices, hotels and shops, and they look their best on a feature wall where light falls across the facets.
How do I keep the panels clean?
Wipe them with a damp cloth. PVC is waterproof and the panels are low maintenance, so an occasional wipe keeps the white facets looking fresh.