Description
Our Large Hexagon Honeycomb 3D wall panels bring a calm geometric pattern to a plain wall. Large flat-faced hexagons, each about a third of the panel wide, sit edge to edge in a honeycomb, with their points at top and bottom and every other row offset by half a hexagon. Where the hexagons meet, narrow stepped edges leave thin, soft shadow lines, and part hexagons on all four sides take the pattern right to the edge. Each white PVC panel is a 50 x 50cm square with a relief 15mm deep, enough for gentle definition without heavy shadow.
These panels are for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a bed or sofa, a reception wall or the space behind a shop counter. The large hexagons keep the pattern open and unfussy, so it sits as well in a big room as in a small one, and the honeycomb reads clearly from across a space. As light falls across the wall through the day, or from a lamp to one side, the stepped edges catch it and the shadow lines between the hexagons grow and fade, so the wall changes gently without any change of colour.
The panels are formed from a 0.8mm PVC sheet. To fit them, spread adhesive on the back of each panel and press it onto the wall; no special equipment is needed. They cut to fit at the edges of the wall, and the joins are filled with filler and wiped clean for a neat, continuous finish. Adhesive and filler are sold separately. When working out how many a wall needs, four panels cover one square metre. PVC is waterproof, and the panels wipe clean with a damp cloth, so care is simple. For a balanced look, start at the centre of the wall and work outwards, so the honeycomb sits evenly on either side.
Specification
| Pattern |
Large Hexagon Honeycomb |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Large Hexagon Honeycomb pattern look like?
It is a honeycomb of large flat-faced hexagons, each about a third of the panel wide, set edge to edge with alternate rows offset by half a hexagon and thin shadow lines where they meet.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measuring your wall in square metres gives you a quick guide to how many to order.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel, press it onto the wall and cut panels to fit at the edges. The joins are then filled with filler and wiped clean, and no special equipment is needed.
Do I need to buy anything else to fit them?
Yes, you will need to buy adhesive and filler as well, because neither one comes with the panels themselves.
Where can I put these 3D wall panels?
They are made for interior walls in homes, offices, hotels and shops, and they work well on a feature wall where light can fall across the honeycomb.
How do I clean the panels?
A wipe with a damp cloth is all they need, as the white PVC is waterproof and the panels are low maintenance.