Large Faceted Triangles 3D PVC Wall Panels 50 x 50cm - White

Our Large Faceted Triangles 3D wall panels bring a sharp, angular geometry to a plain wall. Narrow flat grooves divide each white PVC panel into eight large, irregular triangles, each rising to an off-centre point where three flat facets meet, so the surface reads like sharply folded paper. Two long parallel grooves run at a shallow angle from lower left to upper right, and the biggest triangles stretch almost the full width along the top and bottom edges. Each panel is a 50 x 50cm square with a relief 32mm deep, enough depth for the facets to throw clear shadows.

These panels are made for interior walls in homes, offices, hotels and shops. In a living room or bedroom they make a feature wall behind a sofa or bed; in a hotel corridor, office reception or shop they give a blank surface a crisp, architectural character. The pattern changes as light falls across it: side light from a window or a wall lamp catches one facet and leaves its neighbour in shade, so the surface shows a shifting play of light and grey. Because the long grooves run diagonally, the pattern gives a wall a sense of movement rather than a static grid.

Each panel is formed from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. The panels can be cut to fit your wall, and four panels cover one square metre, which makes working out how many a wall needs simple. The PVC is waterproof and wipes clean with a damp cloth. A run of panels across the full width of one wall usually looks more considered than a small patch, and simple, low furniture in front lets the facets do the work.

What does the Large Faceted Triangles pattern look like?

Narrow grooves divide the panel into eight large, irregular triangles, and each one rises to an off-centre point where three flat facets meet, much like sharply folded paper.

How do I work out how many panels my wall needs?

Each panel is a 50 x 50cm square, so four of them cover one square metre; measure your wall in square metres and allow four panels for each one.

How are these 3D wall panels fixed to the wall?

You spread adhesive across the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean, with no special equipment needed.

What else will I need to buy to fit them?

You will need to buy adhesive to fix the panels and filler for the joins, as neither comes with the panels themselves.

Can I cut the panels to fit my wall?

Yes, the panels can be cut to fit, so you can trim the last panel in a row to finish a run neatly at the edge of the wall.

How do I keep the panels clean?

The PVC is waterproof, so a wipe with a damp cloth is all the panels need to keep the facets looking crisp and fresh.