Description
Three integrated LEDs sit behind a frosted white diffuser, throwing an even warm white glow along a compact rectangular body finished in sand white. At 260mm long it is a modest piece, low in profile and quiet on the wall, with the soft matt tone of the finish keeping it from drawing attention when the light is off. The colour of the light is warm rather than crisp, the sort that flatters plaster, paint and timber. There is no switch on the body and no dimming, so it takes its cue from the wall switch.
We would use it where a lamp has nowhere to stand: a narrow hallway, the turn of a staircase, an alcove beside a chimney breast, or in pairs either side of a bed where reading light is wanted without a cluttered bedside table. It suits rooms that want light spread along a wall rather than pooled in one spot, so it works well on a landing or in a corridor with several doors off it. Being unsealed against damp, it belongs in the dry rooms of the house and should stay out of shower rooms and porches.
The body is finished in a fine sand white that reads as a soft off-white against most walls, and the diffuser is a frosted white that hides the LEDs rather than showing them as points. Keep the diffuser clear of dust and the light stays even: switch off at the wall, let the fitting go cold, then wipe the face with a barely damp cloth and dry it. Nothing solvent should go near it. It carries a three year warranty. We also stock the same light in an oval, should a softer outline suit the room better.
Specification
| Colour |
Sand White |
| Ceiling Mountable |
Yes |
| Weight |
0.69KG |
| Length |
260mm |
| Height |
125mm |
| Projection |
60mm |
| Materials Used |
Aluminium Die-Casting Body, Acrylic Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
3 x 4W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
490lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
14W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted White |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
490 lumens in total at 3000K, a warm white that reads soft rather than blue, spread through the frosted diffuser so the three LEDs are not seen individually.
Can it be dimmed?
No. It is non-dimmable and should be run from an ordinary on/off wall switch rather than a dimmer.
Are the LEDs replaceable?
No, the LEDs are integrated, so there is nothing to change and no lamp to buy. The fitting works as one sealed unit.
How far does it stand off the wall?
It projects 60mm, and measures 260mm long by 125mm high, so it stays tight to the wall in a tight hallway.
Is it suitable for a bathroom?
No. It is rated IP20, which means dry indoor rooms only, away from splashes and steam.
Is there another shape in this range?
Yes, there is an oval version in the same sand white finish with the same warm white output.