Description
An oval face of frosted white glows evenly rather than throwing a hard pool of light, set on a sand white body that sits close to the wall with only a shallow projection. The integrated LED draws 12W and gives 490 lumens of warm white, a soft 3000K that sits comfortably against pale paint. There is no switch on the fitting itself, so it takes its cue from the wall switch it is wired to, and the output holds at one level. We reach for it where a table lamp simply is not an option.
Hallways and landings are the obvious homes: a pair facing each other along a corridor, or one at the turn of a staircase so light falls on the treads without dazzling anyone coming down. It suits bedrooms as well, above a bedside table where a shade would only get knocked, and it earns its place in a study or a small sitting room as background light beside a brighter central fitting. Dry, heated rooms are its territory, and we would not choose it for a shower room or an exposed porch.
The frosted white face diffuses the light behind it so the whole oval reads as one panel, while the sand white finish is a flat, quiet white that settles into most wall colours rather than standing out against them. Dust gathers on the top edge more than on the face, so lift it off with a dry cloth every so often with the power off at the switch. It carries a three year warranty. We also stock the same fitting with a rectangular face, which lets you keep one shape running through a hallway or mix the two where a stair meets a landing.
Specification
| Colour |
Sand White |
| Ceiling Mountable |
Yes |
| Weight |
0.73KG |
| Length |
280mm |
| Width |
140mm |
| Projection |
60mm |
| Materials Used |
Aluminium Die-Casting Body, Acrylic Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 12W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| System Flux |
490lm (±5%) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
14W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted White |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What are the dimensions?
It measures 280mm long by 140mm wide, and projects 60mm from the wall. The fitting weighs 0.73kg.
Can it be dimmed?
No. The LED is non-dimmable, so it should be run from a standard switch rather than a dimmer.
Do I need to buy a bulb?
No. The LED is integrated within the fitting and cannot be replaced separately.
How bright is it, and what colour is the light?
It produces 490 lumens at 3000K, a warm white tone closer to a traditional bulb than to cool daylight.
Is it suitable for a bathroom?
It is rated IP20, so it belongs in dry rooms such as bedrooms, hallways and living spaces rather than bathrooms or outdoors.
How should I clean the frosted face?
Switch the power off first, then wipe gently with a soft dry cloth. Avoid solvents and abrasive creams, which can mark the sand white finish.