Description
The Kermora is an LED panel light for the ceiling, built as two square frames that interlock at an angle and fix to a compact square base. The body is black steel and each frame carries a white plastic diffuser, so the lit edges read as clean bands of light inside a crisp black outline. It measures 52.5cm long, 31cm wide and 7cm high, which keeps it close to the ceiling rather than hanging into the room. The LEDs are integrated, with two 11W light sources giving 1,380 lumens each in a warm white of 3000K. It is rated IP20, which settles where it goes: indoors, in dry rooms.
Because it keeps close to the ceiling and spreads its light across two frames, it suits rooms with lower ceilings where a pendant would hang too low, such as a hallway, a landing, a bedroom or a living room. Warm white at 3000K is a gentle, homely tone for the rooms where people relax, and with 1,380 lumens from each of its two lights, one fitting gives a room good general light. The geometric shape gives a plain ceiling some interest even when unlit, and the black and white pairing sits comfortably with monochrome, grey and neutral schemes.
There are no settings to manage. It is not dimmable and has no switch of its own, so you control it from the wall switch like any ordinary ceiling light, and it comes on at full brightness each time. It runs on 220-240V mains and carries an energy class of E. As a wired-in mains light it should be installed by a qualified electrician, and the installation instructions are available as a download. Packed, it weighs 0.828KG. Measure the spot first: at 52.5cm long and 31cm wide, the frames need a clear stretch of ceiling to sit centred.
Specification
| Length |
52.5cm |
| Width |
31cm |
| Height |
7cm |
| Body Material |
Steel |
| Body Colour |
Black |
| Shade Material |
Plastic |
| Shade Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
2 x 11W |
| Lumens |
1,380lm per light (2 lights) |
| Colour Temperature |
3000K |
| Dimmable |
No |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Weight (packed) |
0.828KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Kermora go in a bathroom?
No. It is rated IP20, which means it is meant for dry indoor rooms only, so we would keep it well away from bathrooms and anywhere damp.
Is the Kermora dimmable?
No, it is not dimmable. It has no switch of its own and is switched at the wall, coming on at full brightness each time.
How bright is the light?
Each of its two integrated LED lights gives 1,380 lumens at 11W, in a warm white of 3000K that suits living spaces well.
How big is the fitting?
It is 52.5cm long, 31cm wide and 7cm high, so it sits close to the ceiling and suits rooms with lower ceilings.
What materials are used?
The body is black steel and the diffusers are white plastic, giving black edges around bands of white light along each square frame.