Description
The Kamarne is a fixed LED downlight: a round black bezel in aluminium with a faceted reflector set behind a clear cover, sending the light straight down into the room. It is 8.8cm in diameter, fits a ceiling cut-out 6.8cm wide and needs 5.6cm of depth behind the ceiling. The LED is integrated, so there is no bulb to buy or change; it draws 6W and gives 450lm at 2700K, a warm white that feels relaxed rather than clinical. It is rated IP20, which settles where it goes: indoors, in dry rooms.
Because the head is fixed rather than tilting, it gives an even, downward light, which is just what a hallway, landing or living room needs. A row of them along a corridor lights the way without a pendant in sight, and a few spaced across a living room ceiling give soft general light. The black bezel is a crisp detail against a white or pale ceiling, and it pairs well with black picture frames, door handles and window hardware. Because it is dimmable, you can turn the light low for quiet evenings and bring it back to full brightness for reading or tidying. For anyone who wants a clean ceiling with no visible bulbs, it does the job quietly.
The body is aluminium in black, and aluminium is a light metal that does not rust, which suits a fitting that stays put in the ceiling. There is no switch on the light itself: it is switched at the wall, and it runs on mains power at 220-240V, 50/60Hz, with an energy class of E. As a wired-in mains light, it should be installed by a qualified electrician, and the installation instructions are available as a download. Before you order, measure the space behind your ceiling, because the 5.6cm recess depth is the figure that decides whether it fits.
Specification
| Diameter |
8.8cm |
| Body Material |
Aluminium |
| Body Colour |
Black |
| Light Source |
LED, integrated |
| Wattage |
6W |
| Lumens |
450lm |
| Colour Temperature |
2700K |
| Dimmable |
Yes |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Recess Depth |
5.6cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.18KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Kamarne downlight go in a bathroom?
No. It is rated IP20, which means it is made for indoor, dry rooms only, so we would keep it out of bathrooms and away from water.
What size hole does it need?
It needs a ceiling cut-out 6.8cm wide and 5.6cm of depth behind the ceiling, and the black bezel is 8.8cm in diameter.
How bright is the light and what colour is it?
It draws 6W and gives 450lm at 2700K, a warm white that suits living rooms, hallways and landings in the evening.
Is the Kamarne downlight dimmable?
Yes, it is dimmable. It has no switch of its own and is switched at the wall, so you control it from there.
Can the head be angled?
No, this is a fixed downlight, so the light points straight down rather than tilting towards a wall or a picture.
Does it need a separate bulb?
No. The LED is integrated into the fitting itself, so there is no separate bulb to buy or replace.