Description
Our Irregular Wavy Ribs 3D wall panels bring a loose, hand-drawn rhythm to a plain wall. About ten raised ribs of mixed widths run from edge to edge across each panel, and every one bends in its own easy curves, so the flat channels between them widen and narrow and the pattern never repeats within the panel. The ribs are rounded and stand out in a relief 13mm deep, enough to give real shape without crowding a room. Each panel is white PVC, a 50cm square.
These panels are made for interior walls in homes, offices, hotels and shops. Put them behind a bed, along a living room wall or on a feature wall in a reception area, and the irregular ribs read like ripples or drawn lines rather than a strict stripe. Side light from a window or a wall washer catches the rounded tops and leaves soft shadows in the gaps, so the wall shifts gently through the day. Square panels hang either way, so the ribs can run upright to draw the eye towards the ceiling, or across the wall to make a short run feel longer and calmer.
Each panel is made from a 0.8mm PVC sheet, and PVC is waterproof, so a wipe with a damp cloth is all the care it needs. To fit, spread adhesive on the back of the panel and press it onto the wall; cut panels to fit at edges and corners, then fill the joins with filler and wipe them clean, with no special equipment needed. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many your wall needs. Start fitting from the centre of the wall so any cut panels sit evenly at both ends, and light it from one side to bring out the ribs.
Specification
| Pattern |
Irregular Wavy Ribs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
13mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
Which way do the Irregular Wavy Ribs run?
Each panel has about ten rounded ribs of mixed widths that curve loosely from edge to edge, and because the panel is square you can hang it with the ribs upright or running across the wall.
How big is each panel and how many will I need?
Each panel measures 50 x 50cm, and four panels cover one square metre, so measure your wall in square metres to work out how many you need.
How are the panels fixed to the wall?
Spread adhesive over the back of the panel and press it onto the wall, then fill the joins with filler and wipe them clean; you need no special equipment.
Do I need to buy anything else?
Yes, you will need adhesive to fix the panels and filler for the joins, as neither comes with them, so pick both up alongside your panels.
Can I cut the panels to fit my wall?
Yes, panels can be cut to fit at the edges and corners of a wall, so a run does not need to finish on a whole panel.
How do I clean the panels?
PVC is waterproof and low maintenance, so a wipe with a damp cloth is all it takes to keep the white ribs looking fresh.