Description
Our Irregular Triangular Facets 3D wall panels are covered edge to edge in flat triangular facets that meet at sharp ridges, forming irregular pyramids and hollows that vary in size and point in many directions. There is no grid and no obvious repeat, so the pattern looks broken and natural, rather like cut crystal or folded paper. Larger pyramids sit among smaller facets, and their steep sides give a bold relief 27mm deep. Each panel is white PVC, a 50 x 50cm square.
They are made for interior walls in homes, offices, hotels and shops, and they work best as a feature wall where the pattern has room to run. Behind a bed or sofa they add depth without colour, and behind a reception desk or shop counter they give a plain wall a crisp, architectural backdrop. Because every facet catches light at its own angle, the wall changes through the day. Light from a window to one side, or a wall washer mounted above, throws dark shadows into the deeper hollows and catches the ridges, so the relief reads strongly in side light. Soft light from the front keeps the wall calm and pale, so the same panels can feel bold in the evening and quiet at noon.
Each panel is a 0.8mm sheet, and fitting needs no special equipment. Spread adhesive on the back, press the panel onto the wall, cut panels to fit at edges and corners, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. The panels are waterproof, wipe clean with a damp cloth and need little maintenance. Four panels cover one square metre, which makes working out how many a wall needs straightforward, and for the boldest look we would run them floor to ceiling on a single wall with a light to one side.
Specification
| Pattern |
Irregular Triangular Facets |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
27mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Irregular Triangular Facets pattern look like?
Flat triangles meet at sharp ridges to make pyramids and hollows of different sizes, angled every way, with no grid or obvious repeat across the panel.
How many panels do I need to cover my wall?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall in square metres and allow four panels for each one.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel and press it onto the wall, then fill the joins between panels with filler and wipe them clean.
Is adhesive included with the panels?
No. The adhesive that fixes the panels and the filler for the joins are both bought separately, so have them ready before you start fitting.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit the edges of your wall, and the whole job needs no special equipment.
How do I clean the panels?
The PVC is waterproof and wipes clean with a damp cloth, so the panels need very little maintenance day to day.