Description
Our Interlocking Ribbed Arcs 3D wall panels bring a quiet sense of movement to a plain wall. Fine raised ribs run straight and vertical through two opposite quarters of the panel, then bend into concentric quarter-circle arcs centred on its middle. The design reads as two matching hooks, one turned half a turn from the other. The arcs stop short of two corners, leaving them plain. Each white PVC panel is a 50 x 50cm square with a relief 6mm deep: shallow enough to keep the look calm, yet deep enough for the rounded ribs to cast soft shadows.
These panels suit interior walls in homes, offices, hotels and shops. Run them across a feature wall in a bedroom or living room, behind a reception desk or along the back wall of a shop. Because the pattern is drawn in fine lines rather than deep blocks, it changes with the light. When light falls across the wall from one side, the ribs pick up crisp lines of shade and the arcs seem to swing round. In softer, even light the white settles back into a gentle texture. Four panels cover one square metre, which makes it easy to work out how many your wall needs.
Each panel is formed from a 0.8mm PVC sheet, which is waterproof. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall and cut panels to fit at the edges. Fill the joins with filler and wipe them clean for a tidy finish. Adhesive and filler are sold separately. Once up, the panels are low maintenance and wipe clean with a damp cloth. For the best effect, set them in a regular grid with every pair of hooks facing the same way, then light the wall from above with spotlights to draw the curves out in shadow.
Specification
| Pattern |
Interlocking Ribbed Arcs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
6mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Interlocking Ribbed Arcs pattern look like?
Fine raised ribs run straight down two opposite quarters of the panel, then curve into quarter-circle arcs around its centre. This forms two matching hooks and leaves two corners plain.
How big is each panel and how many will I need?
Each white panel is a 50 x 50cm square. Four of them cover one square metre, so measure your wall's area in square metres to plan your order.
How are these 3D wall panels fixed to the wall?
You spread adhesive across the back of each panel and press it onto the wall. No special equipment is needed for the job.
Do I need to buy anything else to fit them?
Yes. You will need adhesive to fix the panels and filler for the joins, as neither comes with them.
Can the panels be cut to fit my wall?
Yes, you can cut the panels to fit at the edges of a wall. The joins are then filled with filler and wiped clean for a neat result.
How do I keep the panels clean?
A wipe with a damp cloth is enough. The PVC is waterproof and the panels are low maintenance, so the ribs stay fresh with very little effort.