Description
Our Interlocking Arcs 3D wall panel is a 50cm square of white PVC with a relief 15mm deep, enough for its rounded bands to cast soft shadows. Four long raised bands, each curving round a corner, cross to frame a four-pointed star with gently curved sides at the centre, and a pointed arch reaches in from the middle of each edge. At every corner two small arcs meet in a point. Each band runs off the edge at a matching point, so the curves carry on into the next panel and a run of 3D wall panels reads as one continuous geometric pattern.
These panels are made for interior walls in homes, offices, hotels and shops. They suit a feature wall behind a bed or sofa, a hallway or the wall behind a shop counter, anywhere a plain surface would benefit from some shape. In even daylight the arcs read as a quiet pattern. When light falls across the wall from one side, from a window or wall light, the bands pick up a highlight along one edge and shade along the other, and the stars and arches come forward. Because there is no colour to compete with, the pattern suits most schemes.
Each panel is made from a 0.8mm PVC sheet, and PVC is waterproof. To fit, spread adhesive on the panel's back and press it onto the wall, cutting panels to fit where needed, then fill the joins with filler and wipe them clean; no special equipment is needed. Adhesive and filler are sold separately. Four panels cover one square metre, which makes it simple to work out how many a wall needs. The panels are low maintenance and wipe clean with a damp cloth. For the fullest effect, run them across a whole wall so the arcs flow without a break, and let a lamp or window light them from the side.
Specification
| Pattern |
Interlocking Arcs |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
15mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Interlocking Arcs pattern look like?
Four raised, rounded bands curve round the corners and cross to frame a four-pointed star at the centre, with a pointed arch reaching in from each edge and two small arcs meeting at every corner.
How big is each panel and how many do I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall in square metres to work out how many you need.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
Do the panels come with adhesive or filler?
No. The adhesive for fixing them and the filler for the joins are both bought separately from the panels, so have them ready before you start.
Can I cut the panels to fit?
Yes, the panels can be cut to fit, so you can finish neatly at the edges of a wall.
How do I clean the panels?
The PVC is low maintenance: wipe the panels clean with a damp cloth whenever they need freshening up.