Ignitia 2m LED Suspension Steel Cable Kit - Brushed Steel

The Ignitia is a 2-metre steel suspension cable kit designed for hanging pendant lights, track systems and LED fixtures where height adjustment is needed during or after installation. The kit includes a braided steel cable, screw fittings, brushed steel cable grips, and a ceiling anchor assembly. The cable passes through adjustable grips that lock at any point along the 2m length, allowing precise positioning of the suspended fixture between 200mm and the full 2m drop.

Intended for pendant lights in dining areas, kitchen islands, stairwells and commercial spaces where ceiling heights vary or where fixtures need repositioning after initial fitting, the Ignitia cable takes loads up to the manufacturer's rated capacity and pairs with standard UK ceiling roses and junction boxes. The steel cable replaces decorative chains or fabric flex where a more industrial or minimal aesthetic is required, or where the suspension needs to span unusual distances or angles. The cable can be cut to length on site if less than 2m is needed.

The brushed steel finish on the cable grips and fittings gives a neutral metallic appearance that works across industrial, modern and contemporary interiors without competing with the pendant light itself. The 15mm diameter cable grips are compact enough to sit visually quiet against most pendant canopies while providing secure mechanical fixing. Each component in the kit is reusable, so the cable can be removed and refitted to a different pendant or repositioned without needing replacement parts.

Installation requires access to the ceiling void for the anchor assembly, which fixes into joists or concrete depending on the ceiling construction. The pendant's own electrical cable runs alongside or inside the steel suspension cable, with the steel providing the structural support rather than relying on the electrical flex to carry the weight of the fixture. This separates the mechanical and electrical functions, reducing strain on the wiring and allowing heavier fixtures to be suspended safely.

What weight can the cable support?

The manufacturer's specification does not list a maximum load in the provided data. Contact us before installation if you're suspending a particularly heavy fixture to confirm suitability.

Can the cable be shortened?

Yes. The 2m cable can be cut to length on site with cable cutters if a shorter drop is needed. Once cut, the cable cannot be re-lengthened.

Does the kit include electrical wiring?

No. The kit provides mechanical suspension only. The pendant light's own electrical cable runs separately, either alongside the steel cable or concealed within it depending on the pendant design.

Is it compatible with standard ceiling roses?

Yes. The ceiling anchor assembly is designed to work with UK standard ceiling roses and junction boxes. The steel cable provides the structural support while the electrical connection is made through the pendant's own flex.