Description
Our Horizontal Wave Ribbons design lays four raised ribbons across a white PVC panel, each running edge to edge in one long, gentle wave. Every ribbon rises to a crest left of centre and dips to a trough right of centre, so a single full wave spans the width. Three broad bands swell and taper along their length, while a slim ribbon sits third from the top and breaks up the rhythm. The ribbons stand out from a flat background in a relief 25mm deep, rounded rather than sharp, and each panel is a 50cm square.
These 3D wall panels are made for interior walls in homes, offices, hotels and shops. Set several side by side and the wave pattern repeats across the wall, so a whole run reads as rolling bands of white. They make a fine feature wall behind a bed or a sofa, along a hallway, in a reception area or behind a shop counter. Light does most of the work. With a window or lamp to one side, the rounded ribbons cast soft shadows beneath them and the pattern deepens as the light shifts through the day; lit face on, the wall settles into a quieter, gentler texture.
Each panel is formed from a 0.8mm PVC sheet. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, and cut panels to fit where the run meets a corner or ceiling. Fill the joins with filler and wipe away the surplus for a tidy finish. Adhesive and filler are sold separately. Four panels cover one square metre, which makes working out how many your wall needs straightforward. Once up, they are low maintenance: a wipe with a damp cloth keeps them clean. For a calm room, let the white ribbons stand alone against plain furniture, and keep the wall clear of shelves so the waves run unbroken.
Specification
| Pattern |
Horizontal Wave Ribbons |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
25mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Horizontal Wave Ribbons pattern look like?
Four raised ribbons run edge to edge across the panel, each rising to a crest left of centre and dipping right of centre. Three are broad bands and one slim ribbon sits third from the top, all standing in a relief 25mm deep.
How big is each panel and how do I work out how many I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall in square metres and allow four panels for each one.
How are the panels fixed to the wall?
Spread adhesive across the back of each panel and press it firmly onto the wall. The joins are then filled with filler and wiped clean, and no special equipment is needed.
Is anything else needed to fit these panels?
Yes, you will need to buy adhesive to fix the panels and filler for the joins, as neither comes with the panels.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit, so you can trim them neatly where a run of panels meets a corner, a ceiling or a skirting board.
How do I keep the panels clean?
The PVC is low maintenance. Wipe it over with a damp cloth whenever it needs it, running the cloth gently along the curves of the ribbons.