Description
Our Horizontal Lens Bands 3D wall panels bring a calm, architectural rhythm to a plain wall. Three wide bands run straight across each white panel, divided by narrow straight strips. Above and below each strip the band edges curve away in shallow crescents, so every strip sits inside a long, narrow lens shape that spans almost the full width, widest at the centre and tapering to fine points at the sides. Half-lenses line the top and bottom edges. Each panel is a 50 x 50cm square of PVC with a relief 26mm deep, enough to give the bands real shape rather than a flat, printed look.
These panels are made for interior walls in homes, offices, hotels and shops. A feature wall behind a bed or sofa suits them well, as does a reception wall or the space behind a shop counter. The pattern also changes with the light. In soft, even daylight the curves read as gentle, pale shading, while a lamp or wall light set to one side throws stronger shadows along each crescent, so the lenses stand out more clearly. Because four panels cover one square metre, measuring your wall in metres gives a quick starting point when working out how many you need.
Each panel is formed from a sheet 0.8mm thick. Fitting needs no special equipment: spread adhesive on the back of a panel and press it into place, cutting panels to fit at the edges of the wall. Fill the joins with filler and wipe them clean for tidy lines between panels. Adhesive and filler are sold separately. PVC is waterproof, so a damp cloth is all you need to keep the surface clean, and the panels ask for very little maintenance. For styling, keep the furniture in front low and simple so the full width of the bands stays in view.
Specification
| Pattern |
Horizontal Lens Bands |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
26mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Horizontal Lens Bands pattern look like?
Three wide bands run across the panel, split by narrow straight strips, with shallow crescents either side of each strip forming a long lens shape that tapers to points at the sides.
How big is each panel and how many do I need?
Each panel measures 50cm by 50cm, so four of them cover one square metre of wall.
How are the panels fixed to the wall?
You spread adhesive over the back of each panel and press it firmly onto the wall. No special tools or equipment are needed for the job.
Do I need to buy anything else to fit them?
Yes. You will need adhesive to fix the panels and filler for the joins, and both are bought separately from the panels themselves.
Can I cut the panels to fit my wall?
Yes, the panels can be cut to fit at the edges of a wall, and the joins between them are filled with filler and wiped clean.
How do I clean the panels?
Wipe them over with a damp cloth whenever they need it. The PVC is waterproof and the panels need very little maintenance.