Hidden Adjustable Retractable LED Recessed Downlight 10W 3000K - Black

The Maytoni Hidden is a 90mm recessed downlight with a retractable swing-out mechanism that allows the LED module to pull forward and tilt, redirecting the 10W 3000K beam from vertical to angled accent positions. The black aluminium bezel and housing install into a ceiling void and sit flush when retracted, or extend up to 40mm forward when pulled out for directional lighting.

Designed for retail displays, gallery walls, residential feature lighting and hospitality settings where the light direction needs to change without refitting the ceiling aperture, the Hidden suits both fixed ambient downlighting and repositionable accent work. When retracted the fitting provides standard vertical downlight distribution; when pulled out and tilted it acts as an adjustable spotlight for wall art, display shelving or architectural features. The 3000K colour temperature and high CRI above 80 render colours accurately under the beam.

The aluminium construction manages heat dissipation from the integrated 10W LED, rated at approximately 800 lumens depending on exact specification. The black powder-coated finish on the visible bezel minimises reflections and blends into dark ceilings. The IP20 rating limits use to dry indoor environments only — this is not a bathroom-rated fitting. The 90mm diameter cut-out is standard for most UK recessed downlight installations, and the 97mm overall height requires a ceiling void depth of at least 100mm for clearance above insulation or other ceiling services.

The retractable mechanism uses a spring-loaded hinge that holds the module in position once adjusted, so the angle remains fixed after tilting without needing locking screws. This makes repositioning quick during installation or when room layouts change, without needing to access the ceiling void again. Mains-voltage 220-240V AC connection simplifies wiring compared to low-voltage fittings.

Product Manual

What ceiling void depth is needed?

The fitting is 97mm tall, so a minimum ceiling void depth of 100mm is required for safe installation with clearance above the housing. Deeper voids provide easier cable routing and thermal clearance from insulation.

Is the Hidden dimmable?

The integrated 10W LED is mains-voltage 220-240V AC. Dimmer compatibility depends on the specific dimmer model used — check the product manual or contact us to confirm compatibility before pairing with a dimmer circuit.

Can it be used in bathrooms?

No. The IP20 rating means the fitting is not protected against moisture ingress and must only be installed in dry indoor locations away from direct water exposure.

How far does the module extend when pulled out?

The LED module extends approximately 40mm forward from the flush ceiling position when fully pulled out, allowing it to be tilted and angled for directional accent lighting. The spring-loaded hinge holds the adjusted angle without needing locking screws.