Description
The Hanok is a 41cm linear LED wall light with an integrated 14W 3000K LED delivering 950 lumens through a matt black aluminium housing. The fitting projects 70mm from the wall and casts light across a 110° beam angle, providing ambient wash lighting rather than focused task light.
Designed to mount vertically or horizontally, the Hanok suits hallways, stairwells, living room feature walls and bedroom flanks where linear wall-mounted lighting is needed without the bulk of a traditional sconce. The 41cm length works on walls with 600-800mm of clear horizontal or vertical space, and the low 67mm height keeps the profile slim enough to sit comfortably above furniture or between ceiling and door frames when mounted horizontally.
The matt black powder-coated aluminium finish absorbs reflections and pairs cleanly with dark-toned interiors, exposed brickwork, concrete and polished plaster. The 3000K warm white LED sits behind a diffuser panel that spreads the light evenly along the 41cm length rather than concentrating it at a single point. At 1.1kg the fitting needs secure wall fixings into solid masonry or into studs when mounted on plasterboard.
The LED is non-dimmable and rated for 220-240V mains. The fitting is supplied by Mantra, a Spanish lighting manufacturer with a focus on integrated LED architectural fittings.
Specification
| Colour Finish 1 |
Black |
| Length |
410mm |
| Height |
67mm |
| Projection |
70mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
110° |
| Lumen |
950lm |
| Power Consumption |
14W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
1.1KG |
| Warranty |
3 Year |
Frequently Asked
Can the Hanok be dimmed?
No. The integrated LED is non-dimmable and runs at full output when powered. If dimming is required, consider a separate switched circuit or a wall-mounted smart switch that controls the entire fitting on/off.
Can it be mounted vertically and horizontally?
Yes. The linear design allows the fitting to be installed in either orientation. When mounting vertically it works well flanking doorways or as uplighting beside furniture. Horizontally it suits positions above beds, along hallways or as feature lighting on living room walls.
What wall fixings are needed?
At 1.1kg the fitting needs secure wall fixings. On solid masonry or brick, use wall plugs rated for at least 2kg per fixing. On plasterboard, locate studs or use heavy-duty plasterboard anchors rated for the load.
What beam angle does it provide?
The LED provides a 110° beam angle, spreading light widely rather than creating a narrow focused beam. This makes it suited to ambient wash lighting rather than task lighting or reading positions.