Description
The Maytoni Halo is a 120cm linear suspension light built from a single brass-finished aluminium tube housing an integrated 16W LED. The LED colour temperature adjusts between warm 2600K and neutral 3500K, allowing the light tone to be tuned to match the time of day or the room's interior palette. The suspension height adjusts from 26.7cm minimum to 316.7cm maximum on installation, giving flexibility across different ceiling heights and room uses.
Designed for positioning above kitchen islands, dining tables, office desks and reception counters, the Halo provides direct downward illumination from its 120cm length without requiring multiple separate fittings. The narrow 17mm width keeps the visual mass minimal, so the light reads as a single thin line rather than a bulky pendant. The brass finish on the aluminium tube casts a warm metallic reflection when lit and pairs with both contemporary and mid-century interiors.
The integrated LED is dimmable via compatible wall dimmers or wireless controls (dimmer sold separately), allowing output to be lowered for evening ambient light or raised for task lighting during working hours. The IP20 rating suits dry indoor environments including residential dining rooms, hospitality settings and commercial office spaces. The 16W LED output delivers consistent illumination across the full 120cm run without visible LED hotspots or dark zones along the tube length.
The suspension system uses a single ceiling canopy with an adjustable cable run, concealing the power feed inside the suspension wire. Installation requires connection to standard 220-240V AC mains via the ceiling canopy, which mounts to a ceiling joist or fixing point capable of supporting the fitting's weight. The aluminium construction keeps the overall weight low compared to brass-plated steel equivalents, simplifying ceiling fixing requirements.
Specification
| Height |
316.7cm |
| Length |
120cm |
| Width |
1.7cm |
| Max Height |
316.7cm |
| Min Height |
26.7cm |
| Finish |
Brass |
| Construction |
Aluminium |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Wattage |
16 |
| Colour Temperature |
Adjustable color temperature 2600-3500 K |
| Min Colour Temperature |
2600K |
| Max Colour Temperature |
3500K |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
Is the Halo dimmable?
Yes. The integrated LED is dimmable and requires a compatible LED dimmer switch or wireless control system. Confirm dimmer compatibility with the manufacturer before installation, as not all dimmers support the adjustable colour temperature function.
How is the colour temperature adjusted?
The colour temperature adjusts between 2600K and 3500K. The adjustment method depends on the specific control system installed — some Maytoni LED fittings use a wall switch sequence, others require a compatible dimmer or wireless controller. Refer to the product manual linked in the Downloads section for the exact control method for this model.
What length dining table or kitchen island does this suit?
The 120cm length typically suits dining tables or kitchen islands between 140-180cm long, positioned centrally with approximately 10-30cm clearance at each end. For longer surfaces, consider two Halo fittings spaced evenly, or a longer variant if available in the Maytoni Halo range.
What height should it be hung above a table or worktop?
For dining tables, 70-80cm above the table surface is standard. For kitchen islands used as workspaces, 75-90cm above the worktop gives adequate task light without obstruction. The adjustable suspension allows fine-tuning during installation to suit ceiling height and user preference.