Description
The Geneve is a die-cast aluminium outdoor wall light with opal polycarbonate lenses that cast light both upwards and downwards from a single E27 bulb (sold separately). The rectangular housing measures 310mm high by 210mm wide with a 95mm projection from the wall, finished in a silver powder coat that resists corrosion in coastal and damp climates. The IP54 rating protects the internal components against dust and water spray from any direction.
Designed for porch lighting, patio walls, and external house walls where ambient rather than spotlight illumination is needed, the Geneve suits both contemporary and traditional UK architecture. The up-and-down light pattern grazes the wall surface above and below the fitting, highlighting brickwork or render texture while providing enough spill light for safe passage along paths and doorways. The opal lenses soften the output from the E27 bulb, eliminating harsh glare when viewed directly at eye level.
The die-cast aluminium construction gives the fitting structural rigidity without excessive weight, allowing it to be fixed to standard masonry walls using the two rear mounting points. The silver finish pairs with grey render, white-painted exteriors, and weathered oak or composite cladding, while the rectangular minimalist form keeps the visual focus on the light output rather than the fitting itself. The E27 socket accepts LED bulbs from 6W to 60W, giving flexibility to match the brightness to the size of the area being lit.
Norlys manufactures the Geneve in Denmark and backs it with a 5-year guarantee covering defects in materials and corrosion of the aluminium housing. The fitting carries CE certification and meets UK Building Regulations requirements for exterior lighting installations.
Specification
| Fitting Height |
310mm |
| Width |
210mm |
| Projection/Depth |
95mm |
| Maximum Wattage |
60W |
| Socket |
E27 |
| Bulb(s) Included |
No |
| IP Rating |
IP54 |
| Guarantee |
5 Year Guarantee |
Frequently Asked
What bulb should I use with the Geneve?
The fitting takes a standard E27 bulb up to 60W. Most users pair it with a warm-white LED between 8-12W and 2700K-3000K for exterior ambient lighting. Clear filament LED bulbs work well with the opal lenses, which soften the filament glow.
Is the Geneve suitable for coastal locations?
The IP54 rating and powder-coated die-cast aluminium construction provide corrosion resistance suitable for UK coastal climates. The 5-year guarantee covers corrosion defects. Regular cleaning with fresh water helps maintain the finish in salt-spray environments.
Can it be installed under a porch canopy?
Yes. The IP54 rating protects against water spray but not direct submersion, making it suitable for partially covered locations like porch soffits, recessed doorways, and covered patios. For fully exposed positions, the rating is also adequate for UK weather.
How is the Geneve wired?
The fitting connects to mains voltage (230V) via a rear cable entry point. Installation requires connection to a suitable outdoor lighting circuit by a qualified electrician, meeting UK Building Regulations Part P requirements for external electrical work.