Description
Our Framed Leaf Rosette 3D wall panels bring a classic ceiling rose look to a plain wall. Each white PVC panel carries one central rosette: a ringed boss with a beaded inner circle, four round bosses on the upright and level axes, each with a small flared flower on a pointed stem beyond it, and four fans of long curling leaves on the diagonals. The rosette sits inside a raised square frame, and a border of alternating dots and short oblong beads runs round the edge of every 50cm square. The relief is 5mm deep, enough to give the rosette, frame and beads clear definition.
These panels are made for interior walls in homes, offices, hotels and shops. Fixed side by side, they form a grid of framed squares with one rosette to each, a formal, ordered pattern that suits a feature wall behind a bed, a sofa, a reception desk or a dining table. As light falls across the wall from a window or a lamp to one side, the leaves, bosses and beaded borders pick up soft shadows, so the design reads most clearly in side light and more quietly when lit from the front.
Each panel is formed from a 0.8mm PVC sheet. To fit them, spread adhesive on the back, press each panel onto the wall, cut panels to fit at the edges and fill the joins with filler, wiping them clean as you go; no special equipment is needed. Adhesive and filler are sold separately. Four panels cover one square metre, which makes working out how many a wall needs straightforward. Day to day, a wipe with a damp cloth is all the care they need. For the most balanced look, centre the grid on the wall so the cut panels at each side match.
Specification
| Pattern |
Framed Leaf Rosette |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
5mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Framed Leaf Rosette pattern look like?
Each panel has a single rosette of curling leaf fans, round bosses and small flared flowers around a ringed, beaded centre, set within a raised square frame and a border of dots and beads.
How big is each panel and how many will I need?
Each panel is a 50 x 50cm square, and four of them cover one square metre, so measure your wall to work out how many to order.
How are the panels fixed to the wall?
Spread adhesive over the back of the panel and press it onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.
What else will I need to put them up?
Alongside the panels you will need adhesive to fix them and filler to finish the joins, both bought separately from the panels themselves.
Can the panels be cut to fit my wall?
Yes, they can be cut to fit, so the panels at the edges of a wall can be trimmed to size before you fix them in place.
How do I clean the panels?
They are low maintenance: a wipe with a damp cloth is all that is needed to keep the white relief looking clean.