Four Square Pyramids 3D PVC Wall Panels 50 x 50cm - White

These 3D wall panels bring a crisp geometric pattern to a plain wall. Each white PVC panel is a 50cm square with four large square pyramids, set two by two and parted by narrow flat strips that cross at the centre. Ridges run from each pyramid's corners up to a central point, and the pyramids rise in a relief 35mm deep, low-pitched with clean, sharp edges. A slim flat margin runs round every panel, so when you fit them side by side the grid carries on across the wall without a break. Four panels cover one square metre, which makes it simple to work out how many your wall needs.

We see these pyramid panels working on interior walls in homes, offices, hotels and shops. They make a strong feature wall behind a bed or sofa, along a hallway, behind a reception desk or across the back wall of a shop. The pattern changes with the light. When light falls across the wall from one side, each pyramid shows a bright face and a shaded one, and the relief casts firm shadows, so the grid of squares reads boldly by day and softens under evening lamps. In even light the white settles into a calm, textured surface that sits easily with most schemes.

Each panel is formed from a 0.8mm PVC sheet. To fit them, spread adhesive on the back of each panel and press it onto the wall. The panels cut to fit, and you fill the joins with filler and wipe them clean for a neat finish. No special equipment is needed. Adhesive and filler are sold separately. Once up, the panels are low maintenance and wipe clean with a damp cloth. For styling, keep the furniture in front simple and let a wall light or lamp catch the pattern from the side.

What pattern do these 3D wall panels have?

Each panel has four large square pyramids in a two-by-two grid, with ridges meeting at a central point and narrow flat strips crossing between them.

How big is each panel and how much wall does it cover?

Each panel is a 50 x 50cm square, and four of them together cover one square metre of wall.

How are the panels fixed to the wall?

Spread adhesive across the back of the panel and press it firmly onto the wall, then fill the joins with filler and wipe them clean. No special equipment is needed.

What else do I need to put them up?

You will need adhesive for the backs and filler for the joins, and both are bought separately from the panels, so have them ready before you start.

Can the panels be cut to fit my wall?

Yes, the PVC panels cut to fit, so you can trim them to finish neatly at the edges of your wall.

How do I keep the panels clean?

Wipe them over with a damp cloth whenever they need it, as the white PVC is low maintenance once it is on the wall.