Description
Our Four-Petal Cross 3D wall panels bring a sculpted pattern to a plain wall. Each white PVC panel is a 50cm square filled by a single curved X: four pointed, leaf-shaped petals run diagonally from the centre to the corners, with rounded notches between them near the middle. Between the petals, four smooth triangles with inward-curving sides sit against the middle of each edge, so they meet the triangles of the next panel and the crosses link up. The relief is 23mm deep, enough for the stepped petal outlines to cast clear, moderate shadows.
These panels are made for interior walls in homes, offices, hotels and shops. They work well on a feature wall: behind a bed or a sofa, along a hallway or across the back wall of a shop. The pattern is all curves and points, so it changes with the light through the day. Light from a window to one side picks out the petal edges and darkens the notches at the centre, while flat light from the front softens the design to a gentle texture. In the evening, a wall light set close by brings the relief back, and the panels sit easily with most colour schemes.
Each panel is made from a 0.8mm sheet, and because the material is waterproof, the surface wipes clean with a damp cloth and needs little looking after. Fitting needs no special equipment: spread adhesive on the back of the panel, press it onto the wall, cut panels to fit at the edges, then fill the joins with filler and wipe them clean. Adhesive and filler are sold separately. Four panels cover one square metre, which helps when working out how many a wall needs. For a balanced look, start from the centre of the wall and work outwards, so any cut panels sit evenly at both ends.
Specification
| Pattern |
Four-Petal Cross |
| Colour |
White |
| Material |
PVC |
| Panel Size |
50 x 50cm |
| Relief Depth |
23mm |
| Sheet Thickness |
0.8mm |
| Coverage Per Panel |
0.25m² |
| Fixing |
Adhesive (Sold Separately) |
| Joins |
Filler (Sold Separately) |
| Suitable For |
Interior Walls |
Frequently Asked
What does the Four-Petal Cross pattern look like?
A single curved X fills each panel, with four pointed, leaf-shaped petals running from the centre to the corners and smooth triangles between them at the edges.
How big is each panel and how much wall does it cover?
Each panel is a 50cm square, and four of them together cover one square metre, so you can plan from the size of your wall.
How do I fit these 3D wall panels?
Spread adhesive across the back of each panel, press it onto the wall and cut panels to fit at the edges. Fill the joins with filler and wipe them clean; no special equipment is needed.
Do I need to buy anything else to fit them?
Yes, you will need adhesive to fix the panels and filler for the joins, as neither comes with the panels.
Where can these panels go?
They are made for interior walls in homes, offices, hotels and shops, and they make a good feature wall behind a bed, a sofa or a desk.
How do I keep the panels clean?
The PVC is waterproof, so a wipe with a damp cloth is all the panels need to stay looking fresh.